Tải về "Parts Drawer with a PVC pipe / DIY / Remake"

Is this the end of Square's dream? Drawer dreams of a circle. I have a lot of drawers. Since I started DIY, about half of my work has been devoted to making drawers. It was inevitable because there were more tools and parts to manage. However, the drawers were always square. I wanted to make a circular drawer. The inner diameter 100mm PVC pipe seemed very suitable to me. I wanted to show you how PVC pipe can be transformed. Various details have been added to transform simple piping into a drawer. The front was covered with transparent acrylic so that we could see the inside, and I made a hole in the handle. The back side is made semi-transparent by sanding transparent acrylic, which serves as a subtle light for LED lights. When I put acrylic on the front and back, I cut the PVC pipe 7mm thin, cut a part of the circle 20mm, and put it on the inside. This helps to fix the acrylics more tightly. The bottom of the drawer is cut with a table saw so that it does not rotate when it is mounted. The drawer itself was made into a square shape with a 12T wood panel, and a circular perforated partition was attached to the back of the drawer to prevent light from leaking to the rest of the circle when the LED light was illuminated from the back. Since the LED strip is wound around the circular wood generated when punching in a circular shape and used as a lighting, the lighting inside is circular. The basic frame of the drawer is made of 12T wood panel and grooved with a router. It takes a very precise design to make a total of 10 pieces of wood customized by digging a groove with a router. So I worked very carefully. I've tried a new design on the parts drawer. Please enjoy the production process through the video, and if it was helpful, please push subscribe and like. Thank you.