Download "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD"

"videoThumbnail Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD

HOW TO EASILY MAKE A WRITING MACHINE AT HOME|PEN PLOTTER|CNC MACHINE

HOW TO EASILY MAKE A WRITING MACHINE AT HOME|PEN PLOTTER|CNC MACHINE

Channel: ElectroCrafTech by KusanMohan

CNC 3018 Pro ЧПУ станок с AliExpress

CNC 3018 Pro ЧПУ станок с AliExpress

Channel: Товары AliExpress

Плата EP7i92 для управления станком с ЧПУ на Craftex/LinuxCNC (аналог Mesa). Часть №1

Плата EP7i92 для управления станком с ЧПУ на Craftex/LinuxCNC (аналог Mesa). Часть №1

Channel: ЧПУ Технологии

Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?

Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?

Как сделать 3д модель для печати на 3д принтере. Уроки FreeCAD.

Как сделать 3д модель для печати на 3д принтере. Уроки FreeCAD.

Channel: Ivan D-Craft (Самоделки ЧПУ 3Д Печать Электроника)

как сделать g code

gcode

g code

g code для фрезеровки

как сделать управляющую программу

создание управляющей программы

управляющая программа для чпу

g code в freecad

freecad

управляющая программа в freecad

уроки freecad

чпу

cnc

как сделать 3д модель

3д модель для фрезеровки

freecad path

frecad path g code

00:00:00

Hello everyone, in the previous video I show

00:00:03

how to make a model for printing on a 3D

00:00:05

printer in the phreak program from even

00:00:07

earlier I showed how to make a control

00:00:09

program for engraving inscriptions and

00:00:11

drawings inkscape on the type I'm dying

00:00:13

today we'll look at how to create a

00:00:15

control program for a milling

00:00:17

machine for milling simple parts

00:00:19

We will use the same video from the

00:00:21

program, which is free and downloads from the

00:00:23

official website. The potential of the program

00:00:25

is there and let’s move on to creating the

00:00:27

part and milling it. I will also remind you that

00:00:30

this video does not pretend to be a lesson or

00:00:32

training and may have inaccuracies, but

00:00:34

serves as a clear demonstration of the

00:00:35

capabilities of the program and the technology of

00:00:37

creation g-codes, first of all, you need to

00:00:40

model the necessary part, let

00:00:42

it be a rectangle with a round

00:00:44

cutout, the model is created only to demonstrate

00:00:46

the work, but you can create more

00:00:48

complex objects, open the frigate and

00:00:50

click create a new object,

00:00:52

select the port desing tool and

00:00:54

go to creating sketches, for which

00:00:56

we click create a new sketch,

00:00:58

select the required plane and

00:01:00

start drawing,

00:01:02

draw a rectangle and set the size of its

00:01:04

sides to 20-40 millimeters

00:01:12

and then extrude it by 4 millimeters,

00:01:17

additionally put a checkmark on the line in the

00:01:20

opposite direction, this is necessary so

00:01:22

that 0 the picture is along the upper

00:01:25

border of the workpiece

00:01:27

further on one of the planes of the

00:01:28

rectangle, draw a circle with a

00:01:30

radius of 8 millimeters in order to

00:01:32

accurately position it, I circle around the

00:01:34

center of the workpiece, add

00:01:35

auxiliary geometry using the

00:01:37

tool of the same name, pointing at two

00:01:40

edges of the rectangle and then indicate the

00:01:42

distance from the center of the circle, give

00:01:44

the edge,

00:01:50

cut out the circle by 2 millimeters,

00:01:57

the part is ready and now you need to

00:01:58

create a

00:02:00

program for it in soda, go to the

00:02:02

patch tool,

00:02:06

click create an object, the task will be and

00:02:08

click ok

00:02:14

here click go red box I

00:02:16

know exactly what it is, but I chose

00:02:18

this parameter experimentally, then we select the

00:02:20

working tool, for me it’s a

00:02:22

corn cutter, it must be added

00:02:24

and specified in advance its parameters, click ok

00:02:26

here you can adjust the parameters of the

00:02:29

working tool,

00:02:30

indicate the speed of its movement as

00:02:32

well as deep freeze and its diameter and length, and

00:02:35

if this is indicated in the previous

00:02:36

paragraph,

00:02:48

select we process the surface and

00:02:50

we will cut it out and

00:02:57

indicate the tool to its contour and select

00:02:59

how deep the cutter will go for

00:03:01

one pass

00:03:02

press ok and see the path of movement of the

00:03:04

cutter

00:03:08

[music]

00:03:29

select the next surface this

00:03:32

circle we mill

00:03:33

from the workpiece here we indicate the rest

00:03:35

the trajectory will move in a frieze and

00:03:37

also indicate the recess in one

00:03:39

pass and see the path of movement

00:03:43

[music]

00:03:54

then we need to get the same code

00:03:56

that will the machine is loaded, for this

00:03:59

we select the necessary operation, for example

00:04:01

a contour, and check the contents jekod

00:04:03

jekod it is necessary to copy a text

00:04:05

file, for example a notepad,

00:04:07

and then we will load the machine;

00:04:08

perhaps there is some more correct

00:04:10

way of saving g-codes, but for now I

00:04:14

use this in the

00:04:16

same way, copy the g-code and for the

00:04:18

second operation we can also

00:04:29

pre-launch a simulation

00:04:30

that visualizes the operation of the machine

00:04:33

[music]

00:04:39

[music]

00:04:46

now we open the resulting Jacob

00:04:48

coat of arms ucontrol

00:04:49

set to zero in the picture and run the

00:04:52

code for milling took it will be

00:04:53

a circle but here it is just under the Georgian

00:04:55

contour

00:05:07

[music]

00:05:45

[music]

00:06:11

in this case,

00:06:13

sharp material is used for demonstration, so the

00:06:15

details are not completely cut out; the

00:06:17

workpiece will be 4 millimeters, then the part

00:06:19

will be cut along the contour;

00:06:21

I was only showing the functionality of the

00:06:23

method

00:06:28

[music]

00:06:40

[music]

00:07:24

thank you all for your attention,

00:07:26

if you liked the video or found it

00:07:28

useful, don’t forget subscribe to the

00:07:30

channel and rate the video, it really helps

00:07:33

in the development of the channel and serves as an incentive for the

00:07:35

project, good luck to everyone and bye

00:07:38

[music]

Description:

Создание управляющей программы G CODE в FreeCad для фрезерного ЧПУ станка. Сегодня мы рассмотрим как сделать управляющую программу или G code в бесплатной программе Freecad для ЧПУ фрезерного станка. В процессе видео мы рассмотрим как сделать 3д модель для фрезеровки, а после преобразуем ее в траекторию движения фрезы чпу станка, этот процесс будет называться управляющей программой и будет иметь формат Gcod для "общения" с чпу станком. И в конце посмотрим что у нас получилось и сделаем несложную фрезеровку. Как сделать 3д модель для печати на 3д принтере: https://www.youtube.com/watch?v=AdnfgKJ7KNo Как сделать Gcode для гравировки: https://www.youtube.com/watch?v=ctPdddtrCvU

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD" video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD" video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD" video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD" video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD"?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "Как сделать управляющею программу G-CODE для фрезерного ЧПУ станка в FreeCAD"?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.