Download "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?"

Please wait. We're preparing links for easy ad-free video watching and downloading.

Previous video: Мини фрезер с ЧПУ своими руками. Полезный инструмент в домашней мастерской Next video: фрезеровка герба на чпу станке. milling the brass CNC mill

фрезеровка герба на чпу станке. milling the brass CNC mill

фрезеровка герба на чпу станке. milling the brass CNC mill

Channel: Gestap CNC workshop

Мини фрезер с ЧПУ своими руками. Полезный инструмент в домашней мастерской

Мини фрезер с ЧПУ своими руками. Полезный инструмент в домашней мастерской

Channel: Ivan D-Craft (Самоделки ЧПУ 3Д Печать Электроника)

SolidWorks Добавление изображения в эскиз

SolidWorks Добавление изображения в эскиз

Channel: OhMyCAD

Калибровка осей в Mach3. Calibration axes Mach3

Калибровка осей в Mach3. Calibration axes Mach3

Channel: spec2tex

Подключение двигателя без электроники и Ардуино!

Подключение двигателя без электроники и Ардуино!

Channel: Worldelectronic

Подключение платы EP7i92 к компьютеру. Установка ОС. Часть №2

Подключение платы EP7i92 к компьютеру. Установка ОС. Часть №2

Channel: ЧПУ Технологии

MasterCAM 11. Траектории 2.5D - Криволинейная 2D (Swept 2D) Криволинейная 3D (Swept 3D) Вращение

MasterCAM 11. Траектории 2.5D - Криволинейная 2D (Swept 2D) Криволинейная 3D (Swept 3D) Вращение

Channel: OhMyCAD

Отверстия MasterCAM. Редактируем отверстия, G-код и постпроцессор

Отверстия MasterCAM. Редактируем отверстия, G-код и постпроцессор

Channel: OhMyCAD

DrufelCNC

Drufel

cnc

cnc software

cnc tutorials

export gcode

gcode

g code

cnc control software

drufel cnc

cnc router software

cnc controller software

cnc machine software

best cnc software

hobby cnc software

diy

cnc machine

cnc diy

чпу

фрезерный станок

фрезерный станок чпу

mach3

mach3 usb controller

mach3 breakout board

mach3 usb

аналог mach3

usb motion card

stb 4100

подключение чпу

настройка чпу

лучшая программа чпу

rnr motion

manual

offset

sazan_garage,

cnc,

чпу,

фрезеровка,

гравировка

00:00:02

[music]

00:00:07

I think all users of CNC machines

00:00:09

are familiar with such a program for

00:00:11

controlling the machine as mach3, the program is

00:00:14

quite functional, it has

00:00:16

great capabilities,

00:00:18

but this program has a jamb, it is

00:00:20

buggy, it is buggy and it freezes, why is it

00:00:23

impossible to predict, is it possible to

00:00:25

replace mach3 with something yes maybe it’s

00:00:27

called the truffle seedlings program, I

00:00:30

immediately say that this program is not

00:00:32

suitable for those who in mach3 often

00:00:34

use binding to the center of the hole to the

00:00:37

corner of the workpiece, there is no such option, it is

00:00:38

written that the deficiency program

00:00:41

is suitable for all types of machines, even for

00:00:44

laser plasma milling machines, that it

00:00:46

can it will support manual control

00:00:48

for the x y z axis and a pc supports

00:00:51

emergency stop buttons and incoming

00:00:53

sensor signals supports m later remote control and

00:00:56

supports hot keys that then it

00:00:58

is possible to reset the coordinates,

00:01:00

set the user coordinate system,

00:01:03

invert the step der support

00:01:05

safe z, and later we will return the

00:01:08

slave coordinate axis and in inches and

00:01:11

millimeters of the machine working coordinates

00:01:13

soft limit spindle speed control

00:01:16

support for smooth acceleration of the spindle

00:01:18

turning on spindle off and

00:01:20

turning off in case of an emergency stop

00:01:22

3d model display color to

00:01:25

g-code interpretation this highlights the

00:01:27

g-code syntax displays visually the

00:01:30

spindle line number in the g-code window

00:01:32

has grid in the model window

00:01:34

automatic connection supported by

00:01:36

the device and support for diagnostics of

00:01:39

input ports there is a converter h

00:01:41

pagers g-code and image jack it

00:01:43

supports the area of the length of the tool and

00:01:46

surface scanning effect as

00:01:48

for the interface the main window is divided

00:01:50

into three blocks this is the g-code window in which it is

00:01:52

directly displayed text

00:01:53

control program basic functions

00:01:55

that are responsible for controlling the machine and the

00:01:58

window in which we do not start

00:02:00

displaying the 3d model itself, then g-code a

00:02:03

list of supported g-codes and m codes

00:02:06

and a description of each of them interesting

00:02:09

g-code 2 38. n straight umbrella out of suspicion

00:02:14

that it can somehow be

00:02:15

used to bind a workpiece, but

00:02:18

this is inaccurate, I wrote to technical support

00:02:21

on this issue, we are waiting for an answer and the phenomenon,

00:02:24

please

00:02:29

listen,

00:02:31

even Brad Brad Brad Listen, what are you

00:02:35

talking about, what are you composing it like this?

00:02:41

from the interesting thing regarding m

00:02:44

codes m13 turn on cooling and

00:02:47

spindle rotation clockwise m14

00:02:49

turn off cooling of spindle rotation

00:02:51

counterclockwise further minimum

00:02:54

system requirements

00:02:55

you can use 32 bit or four

00:02:57

bit sponge or computer there are

00:02:59

recommended requirements

00:03:00

there is a minimum

00:03:04

another section this is documentation

00:03:06

program manual on using g-codes and an

00:03:09

online manual there is a manual for the

00:03:11

controller each controller that

00:03:13

this program supports has its

00:03:15

own manual

00:03:20

we will look at the manual for my

00:03:21

little red dress here there is a wiring diagram pin

00:03:25

assignment

00:03:28

connecting spindle outputs

00:03:31

connecting buttons and stop

00:03:34

connecting samples connecting limit

00:03:37

switches relays

00:03:40

so connection incoming

00:03:43

connection ports m later, a plate and

00:03:46

instructions for installing the program, a

00:03:49

short explanation of the interface, what it is

00:03:52

needed for, and what about

00:03:55

the settings, that is, a complete explanation as

00:03:57

one construction, what is needed, and then as

00:04:01

for the output ports itself,

00:04:04

that is, what needs to be turned on and what is needed

00:04:07

specify

00:04:12

machine spindle settings and coordinates

00:04:15

dimensions Russia

00:04:18

use of software restrictions

00:04:21

function of the house

00:04:26

as you know the postprocessor very much

00:04:28

depends and for working with the program it

00:04:30

took a long insi so that there was a correctly

00:04:33

created g-code they developed

00:04:35

postprocessors for fusion programs 360

00:04:38

back track cows like a shield disk about that

00:04:40

and solidcam in addition to the fact that they have

00:04:43

processors, they also have a short video

00:04:45

instruction on how to install these post-processors,

00:04:49

let's look at the program itself, we

00:04:51

have a button for opening a g-code file, a

00:04:53

button for editing g-code

00:04:55

opens already open g-code and allows you to

00:04:57

add some rights to it, these

00:04:59

changes can simply be applied to an

00:05:01

existing file, or you can save it

00:05:03

as a separate file, then we have a

00:05:05

settings button and a program information button

00:05:08

with a code window, everything is clear,

00:05:11

bend it with a g-code, we have a

00:05:13

launch button for control programs

00:05:16

pause button stop button emergency stop and

00:05:19

below the nose there is a window in which the

00:05:21

current program notification is shown,

00:05:22

then we directly have the

00:05:25

control of the machine, we

00:05:28

have switching between working

00:05:29

machine coordinates and switching

00:05:31

between it and the metric system there is a

00:05:34

button to reset the value of all axes there is a

00:05:37

button to send machine in coordinates x0 y0

00:05:40

z0 and separately there is a button for sending

00:05:43

machines coordinates x0 y0 then we

00:05:46

have three buttons which concerns

00:05:47

hamming the first button is rude to all three

00:05:50

axes the second button we have a hall not only the

00:05:52

x y axes and 3 is rude only to the z axis then

00:05:58

we have tools for probing and for

00:06:00

controlling the spindle, buttons for turning

00:06:03

the spindle off, and we have

00:06:04

the ability to adjust the speed, and the

00:06:06

speed adjustment works crookedly;

00:06:08

you cannot enter a value by hand, the

00:06:11

speed value is only with a

00:06:13

certain step, and

00:06:16

then what concerns us is manual

00:06:18

movements, there is a feed

00:06:21

increase, decrease shows the current

00:06:24

value and buttons for country

00:06:26

movement along the axes up down left

00:06:28

right you can also move diagonally while

00:06:30

changing the x and y coordinates

00:06:33

moving along the z axis are displayed separately on

00:06:36

the right we have buttons that

00:06:38

switch because we have models to

00:06:40

turn the grid on and off and show the

00:06:42

dimensions of the worker table increase

00:06:44

decrease scale scale one to

00:06:46

one or increase 10 times

00:06:50

when we go to the settings itself what we

00:06:52

see is the default feed speed value,

00:06:54

that is, if the g-code headlight does not

00:06:57

indicate the feed for idle and working

00:07:00

movements, then the feed value will

00:07:01

fight from here and here there

00:07:04

is also a function called optimization, the

00:07:06

meaning is that when

00:07:08

moving along curved victoria, the feed

00:07:10

will automatically decrease, then

00:07:13

we have the controller settings when

00:07:14

connecting any supported

00:07:15

controllers, they should be automatically

00:07:17

detected, let's see how

00:07:19

quickly this happens using an example, we'll

00:07:22

look at mine red board and

00:07:24

look at the board on it, the

00:07:34

next tab is

00:07:37

here, you can enable the use of an axis,

00:07:40

specify the number of steps per millimeter,

00:07:43

you can specify the maximum speed for the

00:07:45

acceleration axes, you can also invert the

00:07:49

step or direction of rotation, eliminate

00:07:52

backlash, and it is possible to enable a

00:07:54

slave axis

00:07:57

calibration rb here as well as in the

00:07:59

mach3 program we select an axis by specifying the

00:08:01

distance that must be

00:08:02

traveled along this axis, select the speed at

00:08:04

which this distance must be covered

00:08:06

and press start, then we

00:08:08

measure the distance traveled by the machine,

00:08:10

enter the value in the right window and

00:08:12

click calculate and we automatically

00:08:14

get the value of the steps that must be

00:08:16

taken a stepper motor in order to

00:08:18

make a machine per millimeter along

00:08:19

any of the axes according to the settings of

00:08:22

Xiang Xiang shoes is much simpler than mach3, for example,

00:08:25

to use the button there is a top, we

00:08:26

simply indicate the number of the input port,

00:08:28

for example, desk number one for pro bing,

00:08:31

we indicate port number 2 if required

00:08:33

connect the start-stop or pause buttons,

00:08:36

then we simply indicate the input ports to

00:08:38

which these buttons are connected, there is

00:08:41

diagnostics of the input ports also in the

00:08:42

mach3 program, here it is shown with

00:08:45

robot koch them or the spindle settings inputs,

00:08:47

here you need to specify the

00:08:49

maximum number of revolutions and the

00:08:51

acceleration that will be applied when

00:08:53

accelerating the spindle as well you can specify the

00:08:54

default direction of rotation,

00:08:56

clockwise or counterclockwise, and

00:08:58

there is another parameter called spindle; the

00:09:02

spindle speed adjustment coefficient is made with a voltage from 0

00:09:05

to 10 volts, and this setting is needed to

00:09:07

calibrate this output voltage; the

00:09:09

default value is one and

00:09:11

the last tab we have this is

00:09:14

apc here you can specify the dimensions of the machine

00:09:16

along the x y z a b c axes, then enable the

00:09:19

use of minimum maximum

00:09:21

juice limits, indicate the value at which

00:09:23

the deceleration will be carried out during

00:09:25

holding, indicate the direction of how the holding is to be

00:09:28

minimized or maximum, set the

00:09:31

holding order along the axes and, accordingly,

00:09:33

the speed of the hung, in principle, the program is

00:09:35

quite good if we add

00:09:37

some features and capabilities, then it

00:09:39

can become a good competitor to the

00:09:41

program past 4, despite the fact that the

00:09:43

program does not have the ability to

00:09:44

bind to a part, you

00:09:46

can still link to it, if you want, I’ll show you why,

00:09:48

I’m completely swearing

00:09:55

[music]

Description:

Какая программа лучше для управления ЧПУ станком? Mach3? Linux CNC? Существует программа, которая может заменить Mach3 для хоббийного станка с ЧПУ. Называется она Drufel CNC. Настройка программы намного проще, чем настройка программы Mach3. Тем более, что Drufel CNC поддерживает те же самые контроллеры что и Mach3. Да, у нее отсутствует возможность привязки к заготовке, но при всем этом она во многом может ее заменить. ******************** Подключение MACH3 USB контроллера BSMCE04U-PP к частотному преобразователю YL620-A, настройка параметров и регулировки оборотов ******************** Возможности контроллера и его подключение https://www.youtube.com/watch?v=75LOGCNT7h8 ******************** Подключение концевых датчиков https://www.youtube.com/watch?v=715PrnUpxuA ******************** Настройка, параметры и подключение частотника к контроллеру https://www.youtube.com/watch?v=Tx1KE4_fpEQ ******************* Контроллер https://a.aliexpress.com/_993vMn

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?" video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?" video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?" video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?" video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?"?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "Может ли Drufel CNC полностью заменить Mach3 для DIY станка с ЧПУ? Аналог Mach3 или нет?"?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.