下载 "FROM SCRAPS A cool DIY gift for a man"

Hello everyone, in this video I'll show you how to make a gift with your own hands for a real man. I think you will be interested, so sit back and watch this video until the end. And so for this I used a piece of cutting board with a thickness of 3.5 cm and a width of 15 cm, a piece of sheet metal 4 mm thick, two 10 mm studs with nuts, a light bulb with a switch and a plug and a can of paint in matt black . I start by processing a piece of board, which I end on one side at 90 degrees and grind, then I cut it off from the other end to make a square 14 by 14 cm. Next, we take a sheet of metal and use our wooden square to mark six of the same squares and quickly cut it off. I fixed all our parts in this way and polished them with a grinder so that they were all identical in size. In four of a metal square, in the middle I cut out a square of 8 by 8 cm, then we drill all the parts in the corners. Cut the hairpins into four pieces of 35 cm long. After I sanded all the parts, cut out the right places for a light bulb with a cartridge, then burned our piece of wood and brushed it with a nylon brush, well, then we begin to assemble our structure, that is, tighten the nuts, after which we paint over and it remains only to evaluate our “masterpiece”. For those who are interested in this topic, enjoy watching)))) If you liked the video, subscribe to the channel and press the bell icon so you don't miss new videos)) Comments are welcome :)))) My most popular video at the time of publication: https://www.youtube.com/watch?v=kRYWqZzOVY4 Link to my channel: https://www.youtube.com/channel/UCCC_SdtPYYklQVAoL1y_GmA Link to previous video: https://www.youtube.com/watch?v=QaHapfeG0k4 Another cool handmade gift: https://www.youtube.com/watch?v=pq2PB7Rnmws