İndir "Intro to Raspberry Pi Pico and RP2040 - C/C++ Part 1: VS Code and Blink | Digi-Key Electronics"

Previously, we covered how to program the Raspberry Pi Pico using MicroPython. In this tutorial, we will show you how to create a simple blink program using C. We will also configure VS Code so that it can build projects with the push of a button. Note that the written version of this tutorial can be found here: https://www.digikey.com/en/maker/projects/raspberry-pi-pico-and-rp2040-cc-part-1-blink-and-vs-code/7102fb8bca95452e9df6150f39ae8422 You will need to install the build tools for the RP2040. I recommend following Chapter 1 (for Linux) or Chapter 9 (for macOS and Windows) of the official Getting Started with Raspberry Pi Pico guide (https://datasheets.raspberrypi.org/pico/getting-started-with-pico.pdf). Alternatively, if you are on Windows and do not wish to install Build Tools for Visual Studio, you can follow the guide here: https://shawnhymel.com/2096/how-to-set-up-raspberry-pi-pico-c-c-toolchain-on-windows-with-vs-code/ In VS Code, you will want to install the CMake and CMake Tools extensions. These tools will provide buttons on your status bar that allow you to build your project by clicking a button. All of your projects will need a unique CMakeLists.txt file, which tells the cmake tool how to generate the build files. CMake is a build system generator and does not actually build the program. The Raspberry Pi Pico SDK uses “make” as the actual build system. We can call cmake and make in the command line to build the project, or we can click on the CMake and Build buttons in VS Code to accomplish the same thing. To upload the compiled program, we put the Pico into bootloader mode by pressing and holding the BOOTSEL button when plugging in the USB cable. This will cause the Pico to enumerate as a USB drive on the computer. Then, copy the compiled .uf2 file to that drive. The Pico will reset and automatically start running the program. Product Links: https://www.digikey.com/en/products/detail/raspberry-pi/SC0915/13624793 Related Videos: Intro to MicroPython – Maker.io Tutorial - https://www.youtube.com/watch?v=3vnNCSnX7Ig Intro to Raspberry Pi Pico and RP2040: Part 1: VS Code and Blink - https://www.youtube.com/watch?v=B5rQSoOmR5w Part 2: Debug with Picoprobe - https://www.youtube.com/watch?v=jnC5LrTx470 Part 3: How to Use PIO - https://www.youtube.com/watch?v=JSis2NU65w8 Related Project Links: https://www.digikey.com/en/maker/projects/raspberry-pi-pico-and-rp2040-cc-part-1-blink-and-vs-code/7102fb8bca95452e9df6150f39ae8422 Related Articles: Introduction to MicroPython - https://www.digikey.com/en/maker/blogs/2018/introduction-to-micropython Raspberry Pi Pico and RP2040 - MicroPython Part 1 - https://www.digikey.com/en/maker/projects/raspberry-pi-pico-and-rp2040-micropython-part-1-blink/58b3c31ac93649849b58824caa00529c Learn more: Maker.io - https://www.digikey.com/en/maker Digi-Key’s Blog – TheCircuit https://www.digikey.com/en/blog Connect with Digi-Key on Facebook https://www.facebook.com/unsupportedbrowser And follow us on Twitter https://twitter.com/digikey