Baixar "label applicator with stand for tray without conveyor belt inline labeller head for Romanian buyer"

Model YX-PL510 label applicator with stand for tray without conveyor belt inline type labeller head tested for Romanian customer designed and manufactured by our engineer team in cosmetic&food&pharma making and packaging machinery is widely used in the daily chemical industry like labeller and such like.We as a famous manufacturer moreover can design and produce the packaging machine according to the special requirements from customers. The automatic flat labeling machine is the new generation of packaging equipment. It is special designed based on the automatic labeling machine technology and technical requirements. Can make the adhesive labels stick on the bottle surface smooth and tidy. Labeling process is stable and reliable, and labeling position can reach the ideal requirements. basic parameter of automatic suction type plane surface labeling machine card books notes labeller linear Máquina de etiquetado de superficie plana Model YX-PL510: 1. Voltage: AC110V;50/60HZ 2. Power: 180W 3. Speed: 0-240 pcs per minute (according to the size of the product and the label) 4. Accuracy: ±1mm (according to the surface evenness of the product) 5. Suitable range of the products: Length 30mm-300mm, Width 30-260mm 6. Suitable range of the labels: Length 20mm-300mm, Width 15mm-120mm 7.Specification of the label roll: Outer diameter: 300mm, Inside diameter: 76mm 8.Overall dimensions: 2000mm×650mm×1300mm(L×W×H) 9.Weight: 250 Kg Operating Principle of flat surface labeling machine: When the product is put to the conveyer manually, the conveyer will send the product to the photoelectric sensor area, when the photoelectric sensor get the signal, it will feedback the signal to the system, after receiving the signal, the stepping motor will send out the label, and stick the label on the surface, another photoelectric sensor will limit the sending of the next label on time. When the bottles are sent continuously, the labels are sent out one by one, and label on the surface correctly, after stick the labels on the surface, the brush will smooth the label and ensure the labels stick on the product tightly and smoothly, then the product will be automatic output, the labeling process is finished. Operation Procedure for flat labeller model YX-PL510 1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part. 2. Check if all the position of the labels are correct. 3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass. 4. Turn on the power switch, turn on the optoelectronic switch. 5. Turn on switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them. 6. Adjust the labeling position. 7. Ensure the test is OK, then operating the machine normally. 8. Power off. Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like Model YX-PL510 label applicator with stand for tray without conveyor belt inline type labeller head tested for Romanian customer,please email via [email protected] or browse our website http://penglaichina.com./ Watch us on Youtube:https://www.youtube.com/user/penglaichina Follow us on News Center:https://www.penglaichina.com/news/ Skype us by :turnanewleaf Call us via:0086-15811882441 Whatsapp:0086-15811882441