Unduh "How to Replace Rear Brakes 2000-06 GMC Yukon"

Buy Now! New Brake Pad & Rotor Kit from 1AAuto.com https://www.1aauto.com/*/i/1ABFS00307 Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2000-06 GMC Yukon. • Buy TRQ at 1AAuto.com: https://www.1aauto.com/yt/i/1ABFS00307 • Check here for more videos on the 2000-06 GMC Yukon: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-DSXCIpGO4mnU-69HHn7VU This process should be similar on the following vehicles: 2000 GMC Yukon XL 1500 2001 GMC Yukon XL 1500 2002 GMC Yukon XL 1500 2003 GMC Yukon XL 1500 2004 GMC Yukon XL 1500 2005 GMC Yukon XL 1500 2006 GMC Yukon XL 1500 Tools you will need: • Pry Bar https://www.1aauto.com/*/i/1AXAA00020 • 16mm Wrench • 12mm Socket https://www.1aauto.com/*/i/1AXAA00015 • 18mm Socket https://www.1aauto.com/sockets-ratchets-handles/c/457 • 22mm Socket https://www.1aauto.com/*/i/1AXAA00266 • Ratchet https://www.1aauto.com/*/i/1AXAA00016 • Socket Driver • Socket Extensions https://www.1aauto.com/*/i/1AXAA00015 • Torque Wrench https://www.1aauto.com/*/i/1AXAA00044 • Brake Grease • Brake Parts Cleaner • Copper Anti-Seize • Liquid Thread Locker • Paper Towels https://www.1aauto.com/*/i/1AXSS00035 • Floor Jack https://www.1aauto.com/*/i/1AXAA00068 • Hammer https://www.1aauto.com/hammers/c/451 • Jack Stands https://www.1aauto.com/*/i/1AXAA00065 • Wheel Chocks • Wire Brush https://www.1aauto.com/*/i/1AXAA00079 Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1 Check out our playlist: GMC Yukon 2000-06 2nd Gen: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-DSXCIpGO4mnU-69HHn7VU ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.