background top icon
background center wave icon
background filled rhombus icon
background two lines icon
background stroke rhombus icon

Download "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий."

input logo icon
Video tags
|

Video tags

hamradio
Amateur Radio (Hobby)
радиосвязь
радиолюбительство
радиолюбители
радиостанция
рация
КВ
УКВ
QSO
transceiver
трансивер
связь
радиостанции
обзор
Subtitles
|

Subtitles

subtitles menu arrow
  • ruRussian
Download
00:00:17
Shortwave radios, designed to operate out of the field, are very different from conventional shortwave radios. First of all, they differ
00:00:27
not in technical characteristics, not in parameters, not in the range of operating frequencies, not in output power, but
00:00:34
in their moisture-dust-protection, strength of the case. Well-known radios , for example, the
00:00:41
Yaesu FT-817 is very small in size, and can be perfectly used in the fields, just
00:00:46
as there is a small Elecraft, the Chinese G90, which I recently told you about, you can also
00:00:52
consider that they are designed to work from the fields. But these radios are not all dust and moisture resistant,
00:00:58
their body has a huge number of holes, holes, I would even say, and it is not very convenient to
00:01:04
use them in the fields . Agree yourself, you won't put the Yaesu FT-817 on the sand on the river bank, or
00:01:10
here you won't put it on the snow in the same way. And in the forest, on wet grass after
00:01:16
rain, or even more so during rain, none of the radio amateurs will put it either, since a huge
00:01:22
number of holes on the case, unprotected connectors will lead to the fact that sand, dirt, water, snow will fall
00:01:28
very quickly inside the case, on the printed circuit boards, will fall inside the connectors, and the transceiver
00:01:34
will quickly fail. Therefore, for operation from the field, the transceivers have a very
00:01:39
high degree of dust and moisture protection, and this, first of all, distinguishes them from conventional transceivers.
00:01:45
On my channel, you have already seen several video stories about mobile shortwave
00:01:50
radios, and continuing this topic, today I will talk about the Vertex Standard radio.
00:02:02
Vertex standard vx-1210 radio Short-wave radio, works only in the HF band.
00:02:11
In the receive mode, the frequency range is from 0.5 MHz to 30. In the transmission mode, from 1.6 MHz to 30 MHz.
00:02:18
This is not an amateur radio, it is intended for professional use
00:02:24
in the same way it can be used by radio amateurs. It operates in single-sideband
00:02:30
modulation, upper and lower sideband, which is natural for short-wave radios,
00:02:36
there is amplitude modulation, which is not very convenient with a narrow SSB filter, and a CW
00:02:41
mode, with the same SSB filter. The radio has 500 memory channels, 500
00:02:47
memory cells, which are programmed only with a computer using special
00:02:51
software. The radio is professional, I remind you again. But oddly enough for professional
00:02:57
radio, there is a VFO mode in which you can step along the frequency simply with the help of a
00:03:03
small knob at the radio with a step of 100 hertz. In general, the frequency setting, the frequency setting accuracy
00:03:10
, the minimum for this radio when programming channels is 10 Hz.
00:03:15
The transmitter output power of this radio is 20 watts in SSB and CW mode.
00:03:35
The amplitude is less. There is a reduced power mode of 5 watts. Powered by a built-in
00:03:41
rechargeable lithium battery. The first versions of such a battery had a capacity of 4.8 ampere hours,
00:03:47
later versions of the battery have a capacity of 6 ampere hours. The battery contains four lithium-ion
00:03:53
rechargeable cells, so the output voltage is slightly more than 12 V.
00:03:58
In the assembled state with the battery, the radio weighs a little over 3 kilograms. The radio has been in
00:04:05
production since the early 2000s. Now, unfortunately, it is no longer produced. The standard
00:04:12
minimum delivery set includes, in addition to the radio itself,
00:04:17
only 4 items: a push-to-talk microphone, a lithium rechargeable battery, a charger for charging a
00:04:25
rechargeable battery with charge control, with one LED that
00:04:30
can glow red and green, of course red during charging, green when charging is
00:04:35
complete, and with such a power adapter, which from 220 V makes the voltage 24 V
00:04:41
required to power the charger. Why they were not combined in one case, and why the charging controller
00:04:47
has such large dimensions is a mystery. But the 20-year-old mystery is probably already old. Therefore,
00:04:53
we will not understand this, we will use it simply as it is. No other components,
00:04:59
accessories, items are included in the delivery set, in the minimum delivery set. Everything
00:05:04
else is optional. You have to buy everything. There is, for example, such a whip antenna,
00:05:10
about three meters long. It folds in about the same way as the arches from the tent. But unfortunately,
00:05:15
unlike, for example, the antennas of the Q-mac radio or the Barret 940 radio, the dimensions of the
00:05:23
elements, the diameter of the elements of this antenna are different. Accordingly, they are thinner at the end,
00:05:29
thicker at first. On the one hand, this is good for making it lighter, on the other hand, it is bad
00:05:35
that the elements are not interchangeable. If we break one element, then we
00:05:39
will need to look for a tube of exactly this diameter. As I said, such an antenna is a separate option.
00:05:46
It is not included in the standard delivery set. In order to connect to the radio,
00:05:51
such an adapter is used. As it is called gooseneck. Because it bends right here.
00:05:56
This adapter is also a separate option, it is also not included in the delivery package of this antenna or radio.
00:06:02
This adapter is connected to the antenna with a threaded connection,
00:06:08
and is connected to the radio with a PL or SO-239 connector. There is only one connector
00:06:15
on the body of the radio for connecting the antenna. Antennas connected
00:06:20
with coaxial cables and wire-type antennas, as I have now connected, and such a whip antenna are
00:06:26
connected to it . There is also a short whip antenna to this radio, which is connected
00:06:31
without such an adapter, directly into the connector, has a shorter length, and is more flexible. The one that I now
00:06:54
have a wire antenna connected is not something that is not a radio that is not included in the kit, it is generally a homemade
00:06:59
antenna. Just a piece of wire 10 meters long with a connector, and another short wire as
00:07:05
a counterweight. But among the accessories of this radio, purchased separately, there is also
00:07:11
such a backpack. I would say probably more like a case, since its size is very small.
00:07:17
There are two branches. The main one, in which the radio itself is placed, and an additional pocket,
00:07:23
in which you can place the PTT. For example, such an adapter is a gooseneck, and on the side there is also a
00:07:31
very small flat compartment, into which the folding whip antenna is perfectly removed. In this
00:07:37
way. It is probably impossible to place anything else in this backpack besides the radio.
00:07:45
In the lid right here, in the valve of the backpack, there is a hole that opens with a zipper,
00:07:50
and through this hole you can insert an antenna for working on the go. But in general, the backpack is very small
00:07:57
and I don't even know where to hang it with such dimensions. Is that on hand for one. Because well, very
00:08:04
small size. At first. Secondly, as I have already said many times, if we go somewhere in the fields,
00:08:11
in the forest, for a long time, even for one day, we still take something besides the radio with us.
00:08:16
For example, food, drink, maybe some kind of hatchet, some other objects, a knife. Therefore,
00:08:24
it is not convenient to take one such small backpack with a radio. It is even more inconvenient to take two backpacks with you.
00:08:30
Hang it forward or something, if a real backpack with our elements of hiking equipment
00:08:36
will hang on our backs. In general, as usual, there is a backpack with the radio, but I don't really know how to
00:08:42
use it . Although, on the other hand, it’s probably better than if it didn’t exist at all. At
00:08:47
least a radio in a backpack like a case can be safely put into the trunk of a
00:08:52
car, and not be afraid that it will be torn about something, scratched, or you can put this radio in
00:08:59
some other larger bag in this backpack, as in a case.
00:09:07
Naturally, a radio designed to operate out of the field should have an antenna
00:09:13
tuner to accommodate different antenna sizes. And the VX-1210 radio
00:09:19
also has such an antenna tuner. But this tuner is optional, and it is not included in the minimum package of
00:09:25
this radio either. You need to buy it separately. This tuner is a printed circuit
00:09:31
board that fits inside the case. This transceiver has such a board already installed,
00:09:36
and I will use it. This tuner allows you to tune any antenna to any frequency.
00:09:43
Such a whip antenna, which I showed you with this adapter, or even a shorter one, is
00:09:48
tuned by this tuner at any frequency, both on the 160 m range, and on 29 MHz. The radio is
00:09:55
professional, and therefore there is one more accessory for it, which of course is also optional,
00:10:00
also purchased separately, and this is also a printed circuit board. This is a selective call module. It allows you to be
00:10:07
on duty on short waves and not listen to any interference, but wait directly for
00:10:13
our personal call, which contains information from the digital indicator of the subscriber. This
00:10:20
module is also installed as a printed circuit board inside the radio housing. As with installing the
00:10:25
tuner, you have to open the radio.
00:10:36
.... сallsign R A 3 T L B. - Yes, the signal is growing.
00:10:48
5-8 signal now, it was originally 5-6. In Lipetsk, Vladimir, RA3TLB, here is R2GCC.
00:10:59
Received. 5-9 to you, my name is Alexey, I am near Nizhny Novgorod
00:11:06
in the field, power 20 watts, over. RA3TLB/P here R2GCC, received great, 5-8 ....
00:11:24
For this radio, the manufacturer offers several more types of larger antennas. For example, this is a T2FD broadband antenna. In general,
00:11:31
from this radio, in my opinion, all the components are optional, everything must be bought separately.
00:11:37
There is a DB9 connector on the back of the case, which is placed under a protective dust and moisture-proof
00:11:43
plug, which is pressed very tightly with two screws. So this connector has the
00:11:49
signals of the low-frequency input-output of the receiver and transmitter of the radio, respectively, the signal for
00:11:55
switching the radio to transmit. There is also an input for connecting a telegraph
00:12:01
key. And this connector is also optional. By default, it is not included in the radio. And in
00:12:07
its place there is just a plug that covers the hole. When installing this connector, you also need to
00:12:14
open the case, set up a small tent with this connector, and connect the cable from it to the
00:12:19
main PCB. This module does not contain any electronic components.
00:12:28
There is also a charger connector on the back of the case
00:12:53
for charging the battery inside the radio case. This is the only regular
00:12:58
way to charge the battery. GX16 connector with four contacts. In my opinion, a good solution.
00:13:04
Much better than any circular connectors, as used on household appliances,
00:13:10
small two-pin connectors . To connect the push-to-talk on the side wall of the radio body
00:13:16
there is a special connector, only specific for this radio. No other mic
00:13:23
can be connected. Tangenta is a loudspeaker with a microphone with several
00:13:28
buttons and a clothespin on the back. The cable for programming radio is
00:13:34
also connected to this connector . In my opinion, it is very good that some ordinary
00:13:39
connector, such as RJ-45 or some other connector popular on radio amateur radio,
00:13:44
is not used, but such a connector is made. It is much more dust and moisture resistant, much more durable.
00:13:50
In general, for radio amateurs, it is probably very inconvenient that the connector here is specific.
00:13:54
You cannot use any homemade mic from this radio. But radio is, in
00:13:59
general, not an amateur one. Using such a durable and moisture protected connector on a mobile
00:14:05
radio is very good. In addition to the transfer button, there is also a button on top with a lock. Small. It is
00:14:12
designed to sharply stepwise decrease the volume of the receiver. This is convenient if, for example, we have a
00:14:20
radio in a backpack, we are walking with this radio with a whip antenna somewhere, and we suddenly
00:14:25
wanted to turn down the volume in order to listen to what was happening around us. We don't have to reach for the
00:14:30
knob on the radio, for the volume knob. Moreover, most likely in a backpack we will never reach it
00:14:35
on our backs, and having a tangent in cookies here, we can simply press a button and the
00:14:42
volume of the receiver will be significantly reduced. As I already said. on the top panel of the radio
00:14:48
there is an SO-239 connector for connecting all types of antennas to this radio. The antennas that are tuned by the tuner are
00:14:54
connected there , and the antennas are already matched tuned. One single
00:14:59
antenna connector, and it's SO-239. Of course this is better than the bnc antenna connector would be installed on a
00:15:07
mobile radio. But still, in my opinion, to connect the whip antennas, the connector should
00:15:12
not be coaxial, SO-239 or any other, but just a special threaded
00:15:18
connector, such as on the tuner of the Q-MAC radio or the tuner of Barrett 940
00:15:24
radio. But in general, this connector is also normal. At least it doesn't fall off immediately.
00:15:30
There is also a terminal for connecting ground or counterweight next to the antenna connector. It is very
00:15:35
convenient, you can simply connect any piece of wire to this terminal and use it as a counterweight.
00:15:57
The radio has few controls, as is usually the case with professional radios
00:16:22
The power switch was made to separate controls, a separate switch. This is not
00:16:28
a volume control combined with a switch. And moreover, it is not even some kind of button that
00:16:34
can be pressed accidentally somewhere while carrying the radio. And the radio will turn on and drain the
00:16:39
entire battery. And this is a very hard toggle slide switch.
00:16:45
I don't even know what to call it correctly. Found in the corner right here on the front panel.
00:16:51
It is almost impossible to accidentally turn it on or off. He naturally has only two positions -
00:16:57
on and off. There is a small ledge on it, which you can hold
00:17:03
with your finger and turn this switch to one position or to another.
00:17:09
In my opinion, for a mobile radio, specifically for a radio
00:17:13
operating in the field, carried in a backpack, transported somewhere, this is a very good
00:17:18
solution. It will never happen by accident. Besides it there are
00:17:23
three rotary knobs and 3 toggle switches. Each knob has a fixed
00:17:29
assignment, and you cannot change the assignment of these knobs. And 3 toggle switches are configured from the program. The assignment of the
00:17:37
toggle switches can be selected by the user himself in the program with which all
00:17:41
radio settings are programmed . Naturally, this cannot be done without a program. So, the first knob of
00:17:47
this knob. It does not rotate smoothly, but with small clicks. In VFO mode,
00:17:54
it rebuilds the clarity, in channel change mode, it changes the channel. The display can
00:18:00
show the frequency in VFO mode, and in channel mode it can show either the programmed
00:18:06
channel name or the same frequency. What will be displayed with us is also selected
00:18:11
in the radio settings. The second knob is just an analogue volume control from minimum
00:18:18
to maximum, without any additional features. By the way, this handle rotates very
00:18:25
very tightly, and by chance it is unlikely to turn. Knob 3 is a detuning knob, that is, substrings
00:18:37
in frequency for a more pleasant, more comfortable tone of the SSB signal. In the central
00:18:42
position, respectively, the detuning is disabled, and you can tune the radio to the
00:18:48
left or right, down or up the frequency . Naturally, only in reception mode. In transmission mode, the frequency
00:18:53
does not change. That's all, three pens in total. The first knob, which is a knob, can also be
00:18:59
pressed, and in different modes it performs different functions. In VFO mode, it switches between
00:19:05
fast tuning and normal tuning. Also, with a long press, this knob can, under certain conditions,
00:19:11
activate the tuner setting, start the auto tuner, if this tuner is enabled, if it is
00:19:18
allowed at all. Now about the three tumblers. The first one, the leftmost one, has two fixed
00:19:23
positions. Can be up or down. And the other two toggle switches work like buttons.
00:19:29
They are always only in the top position. They can be briefly pressed into the lower ones, then
00:19:33
they themselves, with the help of springs, return to their original state. The assignment of these toggle switches from the program
00:19:39
is set, as I said. For the first tournament, you can assign, for example, power switching to
00:19:45
full or reduced, or turning the tuner on / off. And a few more similar functions,
00:19:51
And for the second two toggle switches, an absolutely identical set of functions is available.
00:19:57
And these can be functions, for example, switching between VFO mode and memory mode,
00:20:03
also functions such as Selcall operation, automatic tuner start-up , Selcall call, and so on
00:20:10
can be assigned to these two toggle switches . That is, functions that require a short
00:20:17
press. Of course, without a programmer, without a computer, the purpose of these switches cannot be changed. I have
00:20:22
now configured that the first toggle switch, which is fixed, simply switches the power of the radio to full or reduced.
00:20:27
Very comfortably. I remember that in the upper position it is full power in the lower one - reduced.
00:20:32
The second toggle switch switches VFO / Memory mode with a short press. Pressing it once
00:20:40
I go into channel mode by pressing again to go to VFO mode. And while in channel mode, you can
00:20:47
select any channel of interest, and pressing this toggle switch while holding it, copy the channel frequency
00:20:53
to VFO mode. That is, VFO can be tuned very quickly not using the knob, but using
00:20:58
channels that are programmed in different parts of the band. I have the third tumbler now
00:21:05
programmed for the Selcall function.
00:21:09
RW4CQE welcome everyone.
00:21:14
RA3TLB/P ...
00:21:18
TLB / P, good afternoon, not loud, up to 7 points. 56 - 57, operator Vladimir, QTH Rybnoye, over.
00:21:33
Vladimir, roger. Here Alexey, near Nizhny Novgorod, in the field. Power is 20 watts. How copy?
00:21:43
Oh, I didn't take anything. Signal to 0 left. Say it again. Over.
00:21:48
59 Alexey, near Nizhny Novgorod. 20 watts, over..
00:21:57
Roger, near Nizhny Novgorod. The signal disappears ... ... Alexey, in the field, right? Over.
00:22:14
Yes, we have -8 degrees, there is snow, the antenna is a piece of wire 10 meters. Over.
00:22:22
OK, 10 m piece of wire.
00:22:35
On the tangent, in addition to the PTT button, the volume down button, there is also a third button.
00:22:41
Unfortunately, it is not used at all. You cannot assign any functions to it.
00:22:46
When you press it, nothing happens. And in the instructions for this radio, in the user manual
00:22:51
and it is written that this button is not used. Apparently, when developing the mic wanted some
00:22:57
add a function to this button, but for some reason they did not do it later. The mic also has
00:23:02
3.5 mm headphone jack. It is located precisely on the mic, which is on
00:23:08
my opinion is also convenient, since the radio can lie somewhere in a backpack, in a bag, and to the mic
00:23:13
plug in headphones, and we don't need to get the radio out of our backpack for this. Connector this
00:23:18
3.5 mm household unfortunately. But it has a fairly dense plastic
00:23:24
plug, and this connector, in general, should not suffer from environmental moisture either, if
00:23:31
it is closed with this plug. In addition to the loudspeaker in the PTTs, there is also a loudspeaker in the front
00:23:36
radio panels. By the way, it sounds even louder and more pleasant. But at one point in time
00:23:41
only one loudspeaker can work. You can either turn on the loudspeaker in the radio,
00:23:47
or in a mic, and this is done from the program. You can choose that we will always have
00:23:53
only one speaker works, you can assign the speaker switching function to
00:23:59
one of the toggle switches. But then some more valuable functions cannot be assigned to this toggle switch.
00:24:04
Alternatively, you can select the automatic mode. In automatic switching mode
00:24:08
loudspeakers, if the mic is connected, then it uses only the speaker in the mic, if
00:24:13
now disconnect it, the loudspeaker built into the case will automatically turn on.
00:24:20
By architecture, this radio has a classic circuitry for the late 90s
00:24:24
early 2000. This is a conventional double conversion superheterodyne with frequency synthesizer.
00:24:30
The synthesizer is based on the DDS AD9850. This DDS generates a reference signal according to which
00:24:38
controlled voltage generators are synchronized. These are the actual outputs of these generators
00:24:42
and is our synthesizer output. Two frequency conversions. The first IF is 47 MHz, the second is 10.7 MHz.
00:24:50
There is no IF 455 kHz. The main selection filter with a passband of 2.4 kHz is installed exactly on
00:24:57
intermediate frequency 10.7 MHz. This filter is used in both sidebands,
00:25:03
in the upper and lower, in CW mode, and even in amplitude modulation. You understand what
00:25:07
there will be amplitude modulation with such a narrow-band filter.
00:25:14
Here is such a radio. Of course, for ordinary radio amateur work on the air, with the search for those who work for a general call,
00:25:19
it doesn't fit very well. It is not very convenient to use these controls for such purposes.
00:25:25
But it is actually not intended for this. It is designed for professional communication somewhere
00:25:30
came or arrived, deployed a radio, and on pre-prepared frequencies, on channels
00:25:35
pre-programmed, established communication. Moreover, it is possible to do this for any piece of wire,
00:25:41
since the built-in tuner allows you to tune anything you like as an antenna.
00:25:46
This concludes my story about the Vertex Standard VX1210 radio. I pack
00:25:57
radio in a standard complete backpack or a cover, if I can call it that, I fold
00:26:04
and moving from here, from field conditions, to the city, to civilization. Thank you for watching this video.
00:26:10
Work on the air from different radio, from portable and stationary, watch my videos,
00:26:17
subscribe to the channel, to the VK group, to facebook. Alexey Igonin was here. Bye everyone!

Description:

Плейлист "Yaesu": https://www.youtube.com/playlist?list=PLoiTe5OknmXoagV6l4O8B3fLHkA8V74wC Плейлист "КВ радиостанции": https://www.youtube.com/playlist?list=PLoiTe5OknmXpNueFkIL6KgB5ltPyXTIJi Переносная КВ радиостанция Vertex Standard VX-1210. Диапазон рабочих частот: Приём: 0.5 - 30 МГц. Передача: 1.6 - 30 МГц. Режимы работы USB, LSB, CW, AM. Выходная мощность передатчика 20 Вт. В видео рассказано об основных параметрах и возможностях радиостанции, показана её работа и внутренне устройство. Фото в альбоме: https://vk.com/album-126082062_276338610 Спасибо за просмотры и подписку! Для помощи каналу и благодарностей: ЯндекДеньги: 410017381931812 PayPal: [email protected] Пишите комментарии, подписывайтесь на мой канал, не пропустите новые видеоролики. Группа ВКонтакте: https://vk.com/igoninalexey Instagram: https://www.facebook.com/unsupportedbrowser Facebook: https://www.facebook.com/unsupportedbrowser Яндекс ZEN: https://dzen.ru/savage19

Preparing download options

popular icon
Popular
hd icon
HD video
audio icon
Only sound
total icon
All
* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."
** — Link intended for online playback in specialized players

Questions about downloading video

mobile menu iconHow can I download "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий." video?mobile menu icon

  • http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.

  • The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.

  • UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.

  • UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

mobile menu iconWhich format of "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий." video should I choose?mobile menu icon

  • The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

mobile menu iconWhy does my computer freeze when loading a "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий." video?mobile menu icon

  • The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

mobile menu iconHow can I download "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий." video to my phone?mobile menu icon

  • You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

mobile menu iconHow can I download an audio track (music) to MP3 "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий."?mobile menu icon

  • The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

mobile menu iconHow can I save a frame from a video "Vertex Standard VX1210. Мобильная КВ радиостанция. HF Manpack radio. Радиосвязь из полевых условий."?mobile menu icon

  • This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

mobile menu iconWhat's the price of all this stuff?mobile menu icon

  • It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.