Download "Остання нарізка від Лєри"

"videoThumbnail Остання нарізка від Лєри

Бормашина - Своими руками

Бормашина - Своими руками

Channel: РУКОПОП

Запуск печи

Запуск печи

Channel: Вадим Лазутин

Наждак МОД 2801

Наждак МОД 2801

Channel: Вадим Лазутин

Нарізка роботи. Зима 2022

Нарізка роботи. Зима 2022

Channel: Дядько Максим

FAVRETTO. Оптична правилка.

FAVRETTO. Оптична правилка.

Channel: Дядько Максим

Метрическая резьба Финальная формула

Метрическая резьба Финальная формула

Channel: Вадим Лазутин

Вот какой ТОКАРНЫЙ у меня получается своими руками (часть 11)

Вот какой ТОКАРНЫЙ у меня получается своими руками (часть 11)

Channel: Первая Стружка

Довбач. Багато роботи. Рух.

Довбач. Багато роботи. Рух.

Channel: Дядько Максим

Самые крупные токарные станки в мире ..|.. Big lathes

Самые крупные токарные станки в мире ..|.. Big lathes

Channel: IByTech

Ремонт 3е711в. Автоматична вертикальна подача.

Ремонт 3е711в. Автоматична вертикальна подача.

Channel: Дядько Максим

Дядько

Максим

1к62

токарный

станок

фрезерный

токарка

шлифовка

слесарка

сверление

гравировка

00:00:00

[music]

00:00:17

God bless Ivan, dear guests, dear

00:00:20

family, I am glad to welcome you to the First

00:00:22

Ukrainian-language channel dedicated to

00:00:23

metalworking Well, judging by the avatar of

00:00:27

vidos I Suye or by the

00:00:31

name of vidos, as in addition, he wrote it on

00:00:34

Facebook to our group

00:00:36

Lera sold Lera was sold literally

00:00:41

suddenly Moreover I didn't even

00:00:44

have time to put it up for sale anywhere, there's

00:00:47

nothing there, that is, I just said that I

00:00:52

plan to sell the machine, then

00:00:55

more than enough customers appeared. Well,

00:01:00

the machine was sold. The machine was sold. in a

00:01:13

circle on the machine, a

00:01:17

wire, a roller wire, a diamond wire. Well, in

00:01:21

principle, in such a basic configuration,

00:01:23

it comes as a flat grinder, a

00:01:25

balancing rolling pin, a traverse for the Circle,

00:01:28

and there is a little abrasive. That is,

00:01:31

it was sold to the customer as a flat grinder, and a

00:01:35

large flat grinder is needed

00:01:37

for work on magnetic plates.

00:01:40

It was sold. too expensive, I would say

00:01:42

even too expensive for 100,000

00:01:45

million, so

00:01:48

since the money was paid right away and it was necessary to quickly

00:01:54

complete the whole thing, as they say, the

00:01:57

curtains caught fire and I was forced to

00:02:00

complete a lot of orders at an emergency pace,

00:02:03

which you will see in this on the river,

00:02:07

it will probably consist of two dozen beds and a

00:02:10

bunch of all kinds of junk, so what will be

00:02:12

repeated, I didn’t even shoot, there will be a

00:02:16

separate series about dragging the machine out into the

00:02:20

street, protokilazh, because I, like an

00:02:24

angry bariga, bribery, an unscrupulous

00:02:28

seller who

00:02:31

cares only about enriching his own

00:02:34

pockets, classically took on your own, you haul the

00:02:38

machine out into the street and load it with a crane onto the

00:02:41

client's car, that's it, that's what, in

00:02:44

principle, I wish

00:02:46

you all a pleasant viewing, there will be

00:02:49

several beds of IZH, there will be several

00:02:52

oversized things, there will be cutting on the

00:02:54

beds and all kinds of different things,

00:02:57

pulling them out into the yard. Well, you all

00:02:59

remember Do you know what I dragged here piece by piece,

00:03:03

and

00:03:07

assembled here, connected the cube with the

00:03:09

bed, planted the column on the cube,

00:03:13

attached all these

00:03:16

hoods, burdocks, geese, and everything else?

00:03:24

to the yard.

00:03:29

I think I will try because the client does

00:03:32

not want to contact with

00:03:35

the assembly of it then himself, that is, he says you

00:03:39

can disassemble them here to the cog,

00:03:41

but on the street it is more likely on the car. It should

00:03:43

stand assembled if it is in my interests and

00:03:46

pull it out without disassembly 9 t

00:03:50

Well, have a nice viewing,

00:03:53

I'll say again what I always say when

00:03:56

selling any iron, don't

00:03:58

get attached to the iron, don't

00:04:00

get attached to things, don't get attached

00:04:03

to people, don't be fascinated so that you won't be

00:04:07

disappointed later, and so on. Just

00:04:11

go. Continue Go ahead,

00:04:15

develop Well, I think we have a decent

00:04:20

replacement that will work soon.

00:04:23

Enjoy watching the successes. I forgot

00:04:25

to say the most important thing is that from now on we are

00:04:29

forming a queue for the favretto for work on the

00:04:33

faret because the functionality has greatly expanded, the

00:04:38

gait has expanded, so we

00:04:41

are forming a queue for the new machine below under

00:04:45

the video. e-mail, that is,

00:04:48

from TV-6 to 16k20, it’s easy to start

00:04:55

working below under the video mail,

00:04:58

write, we’ll negotiate. Have a

00:05:00

nice viewing,

00:05:06

one pant leg, a616, took it here, it took it

00:05:14

very badly,

00:05:15

plus it ran like a baby, plus the eyebrow is

00:05:21

polished at the moment

00:05:23

[music]

00:05:25

lower front flat rear flat

00:05:29

plane under the front headstock now let's take the

00:05:33

prism,

00:05:35

well, that's it, it's already three tens

00:05:41

now, we'll finish it tomorrow, I've

00:05:48

always wondered why the

00:05:53

surface under the rail was so finished in the 616s, so roughly

00:05:56

rubbed, damn it,

00:05:57

what's up, what's up, well,

00:06:04

that's

00:06:07

all it's done here

00:06:08

[music]

00:06:12

4 dozen, we're already

00:06:15

taking

00:06:17

the cellar,

00:06:26

we're going further hedgehog

00:06:30

250 who sent them in two pieces, here's

00:06:34

one and the

00:06:37

other,

00:06:40

it means that a

00:06:41

Bulgarian girl worked here, a

00:06:46

Bulgarian girl

00:06:47

[music]

00:06:49

back

00:06:51

Bulgarian girls knocked down the tops at first

00:06:57

Well, I've already peeled off the prism on the prism, it

00:07:01

meant the same thing now at let's

00:07:05

try it,

00:07:15

the reverse will die, the emulsion is good,

00:07:24

and we'll drive it,

00:07:27

let's touch it

00:07:31

back

00:07:36

and drive two hundreds.

00:07:44

It's fine, here are

00:07:54

4.

00:08:04

Well, there are 7,600 pits left. And here there is an

00:08:23

oily lake.

00:08:27

You can see the oily lakes.

00:08:52

12 acres have

00:08:55

been cleared so far,

00:08:57

a lot of cars, I'll tell you honestly,

00:09:01

but there are still a

00:09:06

lot of acreage

00:09:13

here, the whole area remains to be

00:09:19

understated in order to remove that

00:09:23

piglet.

00:09:26

I've already made the bottom one, flat, fodder,

00:09:29

done everything, done

00:09:34

until tomorrow, rest here, by the way, too, a

00:09:39

Bulgarian girl, oil lakes are present,

00:09:46

and here and there Bulgarian girl

00:09:49

[music]

00:09:50

we will polish it cold already tomorrow

00:09:52

everything is

00:09:58

like that Well, what about day two of the

00:10:01

last fifty from the comb

00:10:10

Everything is

00:10:11

ready here it is shorter

00:10:15

some kind of unclear a little bit the situation

00:10:19

as a rule

00:10:21

as a rule the

00:10:24

plane of the rear headstock flat

00:10:28

rear flat support and so on one two

00:10:31

three four p They all lie in the same

00:10:34

plane, but here the devil knows what happened. Well, I

00:10:39

ruled out that there were some plaques

00:10:41

similar to the

00:10:44

front headstock.

00:10:47

Well, I did it as it should be.

00:10:50

Well, everything

00:10:54

close takes everything wrong.

00:10:58

The dishes are crooked.

00:11:01

Well, in short, like that. Oh,

00:11:06

it removes everything

00:11:09

like that. that the second one went

00:11:17

from behind

00:11:19

[music]

00:11:24

it is worn out,

00:11:27

well, you can see the

00:11:30

maximalism of the client,

00:11:35

let's do

00:11:39

that there

00:11:43

is no

00:11:50

finish line

00:11:52

on all issues, but here there

00:11:55

were no problems with the front headstock There were no more problems Right away,

00:11:58

everything is

00:12:01

on

00:12:02

the floor,

00:12:08

everything is

00:12:10

unearthly beauty,

00:12:16

yes, sanding the tables to a joint

00:12:21

[music]

00:12:22

According to the idea of the Chinese

00:12:32

there’s not much left, there’s a

00:12:41

ledge

00:12:48

with no way out, it’s true, but

00:12:51

above

00:12:55

how I fixed it

00:12:57

here, I screwed the corner,

00:13:01

and there are

00:13:05

three bolts of shine

00:13:09

and everything is

00:13:16

fine, and the

00:13:44

second one is visible in our mirror, it’s

00:13:49

not so visible, the

00:14:00

reflection of that when the ledge is here,

00:14:04

we remove it, it’s ready.

00:14:08

My friend, my fellow countryman, the

00:14:13

artilleryman

00:14:15

returned from the war

00:14:19

in

00:14:22

I want to take a vacation as a hobby

00:14:26

to engage in forging, he tried it there before that, it

00:14:31

became an anvil, he had an

00:14:34

anvil that was

00:14:35

very strong, very badly beaten, knocked out,

00:14:39

terrible, he

00:14:42

turned to me.

00:14:59

I haven't used it for several years,

00:15:04

but it will be nice for a person,

00:15:11

and the milling was enough. Well, I decided

00:15:15

to have fun, I

00:15:20

collected a

00:15:24

small anvil somewhere,

00:15:30

I'll earn more

00:15:32

if necessary,

00:15:38

so Well, the second batch

00:15:41

[applause]

00:15:44

did the same thing, people liked them, two

00:15:47

identical machines

00:15:49

[applause]

00:15:55

By the way it's going pretty well,

00:16:00

but one, but the

00:16:03

other is still waiting for us

00:16:08

here, there is a little bit of a difference.

00:16:12

By the way, they changed

00:16:14

[applause]

00:16:15

Brains to Leri

00:16:17

[applause]

00:16:19

put Mitsubishi

00:16:20

[music]

00:16:23

that's it

00:16:33

and

00:16:35

Lerochka is falling

00:16:40

dear parish unique fabric

00:16:44

16b-16kp

00:16:46

93rd year

00:16:48

means I want to turn to your attention, this is

00:16:52

already Stalin's friend, which comes across to me with a

00:16:54

perfectly even base, for the sake of

00:16:57

curiosity, I planted it on 4 foils from

00:17:00

beer cans, and all 4 foils

00:17:05

lie down and

00:17:06

clamp at four points. Now

00:17:10

please note that the plane under the front

00:17:12

under the transmission box is

00:17:16

polished in a pair with this is the rest and with

00:17:19

the suspension, it was the client who put masking

00:17:21

tape on it, but it was the polished one,

00:17:24

and it was high quality, now look carefully at the

00:17:27

indicator

00:17:37

[music] there is

00:17:38

little where in which machine such an even base is

00:17:42

[music]

00:17:47

here we are in the entire length

00:17:49

Ana now

00:17:51

with you

00:17:57

on the prism,

00:18:02

what does the prism say,

00:18:11

you can see 15 holes are visible

00:18:16

[music]

00:18:22

Well, you and the base

00:18:26

once again

00:18:35

somehow

00:18:37

came back,

00:18:42

which means that

00:18:44

the base was made according to the mind in relation to everything

00:18:47

else, there

00:18:48

is a possibility that we will not

00:18:50

grind

00:18:52

the plane under the rear headstock, well, that will be

00:18:55

later, the client asked for it, if there is an

00:18:57

opportunity I made an understatement.

00:19:00

Well, because here the output will be useful, it

00:19:03

will be useful, no, no, you see here Prism,

00:19:06

this is the output of prisms like this, nothing

00:19:10

fits here. As it turned out.

00:19:18

here into that

00:19:20

hole and all over here, we follow the prism

00:19:23

to the exit of that hole

00:19:26

Well, we'll see later. Now, first of all, we

00:19:28

'll start grinding the bottom planes

00:19:34

of which

00:19:37

[music] the

00:19:39

client's maximalism is off the charts Let's show it

00:19:43

to six

00:19:44

[music] let

00:19:49

's go out

00:19:53

Here we're not a slipper, it's

00:19:56

hard, then we'll measure it for sake

00:19:59

curiosities

00:20:03

good good workpiece

00:20:05

[music]

00:20:08

the future non-killable machine

00:20:12

the back is flat

00:20:15

here it is very well visible So I take the

00:20:19

remote control I go here and I can clearly

00:20:23

see how it shoots from here Anu shoots together

00:20:26

and half and half [

00:20:29

music]

00:20:35

100%

00:20:38

[music]

00:20:52

. I do one at a time

00:20:54

because it is

00:20:56

not always possible to find such a circle

00:21:00

that would be taken at the same time

00:21:07

and it was cool.

00:21:18

I think I will repeat it until two dozen the

00:21:34

flat rear headstock indicator has not been polished yet. Well, there is

00:21:38

even Kotsky,

00:21:40

look carefully

00:21:50

up to two hundredths,

00:21:53

then the most expensive,

00:21:55

look,

00:22:09

now we will call the customer, maybe we

00:22:11

will not touch it, if he has a

00:22:14

normal quill, then he just adjusts

00:22:18

the caliper and the finish,

00:22:20

even now the rear end

00:22:23

said to grind so that it would take 200.

00:22:28

Well, I immediately

00:22:32

removed these two hundreds with the cleaning strip. Now we move on to

00:22:35

the flat, the

00:22:38

right solution to collect it.

00:22:43

Well, the comb

00:22:48

and it’s ready.

00:22:51

For today, it’s enough.

00:23:00

Stalina is ready,

00:23:03

then you can

00:23:05

call. Let the boys come.

00:23:21

Such metal

00:23:22

sheets

00:23:24

with wheels and then rubber, then the studs are

00:23:30

prepared,

00:23:37

everything is wrong here, as always,

00:23:40

with the aim of defrauding the citizens, the

00:23:45

more money,

00:23:47

cool bed,

00:23:49

quarter, then we will measure.

00:24:02

happy,

00:24:09

then you wash it all with

00:24:12

warm soapy water, because it is greasy, it is an

00:24:16

emulsion, it is greasy,

00:24:19

uncle does not spare a

00:24:22

100-buck bulazikat, it just goes, so do

00:24:26

n’t do it, over there, the

00:24:27

Izhevsk stanin is waiting, I will

00:24:31

paint it after sanding, it’s the

00:24:34

same with

00:24:37

scotch tape, well, now it’s falling

00:24:40

because He talked. Okay,

00:24:44

I’m collecting for separate money, let’s go further.

00:24:47

God bless you. Dear guests, dear

00:24:49

family, I’m glad to welcome you to the First

00:24:51

Ukrainian-language channel dedicated to

00:24:53

metalworking. I was waiting for this moment when

00:24:57

I can show you this, namely the result of

00:25:07

the repair of the bed using Didof technology. I

00:25:13

wrote about it on Facebook and here today

00:25:15

As they say in Invitro conditions, I can

00:25:20

show you Почему етого нельза делать So,

00:25:24

before history, such a machine was

00:25:27

capitalized by the

00:25:29

Yedov method several years ago,

00:25:34

after that the machine was

00:25:36

sold right away Well, my client bought this machine, the

00:25:41

result is deplorable Namely,

00:25:45

the bed was repaired in the Grandfather’s method

00:25:48

with the mandatory application of the author’s

00:25:52

breakdown, the

00:25:54

author of Sky breakdowns

00:25:58

breakdowns breakdowns breakdowns I made a

00:26:03

survey on Facebook so that people

00:26:07

could try to guess what it was done, that it was

00:26:12

done with the

00:26:14

left foot, that’s clear, but who

00:26:17

does it, what tool is it done,

00:26:20

that means the depth of this porn

00:26:24

about 5 hundredths, maybe a dozen here and there on the

00:26:29

plane went deeper than it was done. I do

00:26:32

n't know.

00:26:49

the drill or what does bituet мнение mean? I

00:26:53

specially express myself in the original language

00:26:57

in the language of the original in order

00:27:01

to convey the

00:27:06

essence of the statement of these people as much as possible,

00:27:10

bituet мнение means that in these scratches

00:27:14

oil or other lubricating

00:27:18

materials should be retained, which then serve as a

00:27:22

honingovka that holds the oil film

00:27:26

so that the surfaces are lubricated in the future I

00:27:29

once made a video where I explained on the

00:27:32

example of the GOST about the shabrovka, what you

00:27:35

see now has nothing to do with the

00:27:37

shabrovka, the shabrovka, the scraping scraping, and

00:27:40

so on. These are showerheads and

00:27:43

have approximately the same

00:27:45

relation to the proof of geometry as the guinea pig. To the sea

00:27:47

means see

00:27:50

bituet мнение что on such a surface,

00:27:52

the oil stays better and it lasts

00:27:55

longer. Once in my

00:27:59

video, which was called Почему нельзя

00:28:02

шабит болгарочкой, I explained that the chabro

00:28:06

has a certain characteristic in terms of

00:28:09

roughness, and when we

00:28:13

talk about some tolerance of flatness

00:28:16

or straightness, there are two or three hundreds of hundredths. And at the same time

00:28:19

in our country, the relief of the workpiece or

00:28:22

part exceeds the planar tolerance, then this is

00:28:25

absolute nonsense, I told you about it,

00:28:28

so I came across such a bed, you

00:28:31

see. Today, I want

00:28:33

to show you what will happen if you do this. This is what will

00:28:38

happen next in these

00:28:42

oil lakes or I will them rather, the name is

00:28:45

mud belomorkanals, the

00:28:48

swamp, dirt, dust, shavings are accumulating,

00:28:52

and then the caliper rides perfectly,

00:28:56

let's try to do an experiment.

00:29:18

it holds like this Well, maybe

00:29:22

I overdid it a little, nothing, so let's

00:29:26

spread it with a spread, it will be like a greased one. The turner

00:29:29

greased it with oil before work.

00:29:50

I sprinkle salt and pepper there, I don't

00:29:55

know how you want it. Well, it's still a relatively coarse

00:29:58

shaving, because the main shavings fly in

00:30:02

the air like flour, like flour, like

00:30:06

such a

00:30:08

finely dispersed fraction. Well, it sprinkled, sprinkled, sprinkled, yes,

00:30:11

sprinkled, sprinkled.

00:30:20

I'll take something clean Well,

00:30:24

even if it's this

00:30:26

Let's assume that we have a caliper that goes on this well

00:30:30

Let's assume that there is also oil and

00:30:37

Let's assume that we have a caliper that goes on this

00:30:39

I want to draw your attention to the fact that here I

00:30:42

wipe everything clean to my

00:30:44

favorite pants and our caliper goes along

00:30:47

this line.

00:30:51

You hear these sounds,

00:30:54

wonderful sounds,

00:30:58

true. Cool, true, it takes everywhere, and

00:31:02

look how tight. Cool, true, cool.

00:31:21

if before this

00:31:25

work with a

00:31:28

felt violin, there are no questions, we can

00:31:32

even have

00:31:33

double fun, namely, walk with a

00:31:38

rubber silicone violin,

00:31:41

and on this side

00:31:47

it sweeps nicely,

00:31:52

so now the felt. Where is my felt?

00:32:17

for attention, let's continue

00:32:23

[music]

00:32:25

Yes, I have such a

00:32:26

minimal exit here, but it is

00:32:30

[music]

00:32:35

[applause]

00:32:36

we exit, we move to the feeders and to the

00:32:39

plane under the front beam, here is an

00:32:42

understatement.

00:32:52

I climbed due to the fact that they were not mixed,

00:32:55

I sanded the plane under the previous headstock,

00:32:57

this time I went the other way, this time

00:32:59

I moved the bed, but it stands

00:33:02

on the same

00:33:04

heels with us, and look

00:33:09

at you

00:33:11

[music]

00:33:14

at 0 and too much at 0

00:33:18

and we it should be parallel like this

00:33:20

[music]

00:33:29

gorking slides dear family with pants legs

00:33:33

fun

00:33:35

And this is a bed that, despite the

00:33:39

popularity of this machine, got to us.

00:33:41

For the first time, this is the truth from

00:33:44

TV-320p.

00:33:54

to the extreme, it was because the frame has a

00:33:56

clear base, no feelers are sticking anywhere, nothing is

00:33:59

not this one.

00:34:01

You see how interesting the

00:34:05

fastening of the toothed rail is here. There is a place a little

00:34:07

lower,

00:34:09

what is going on here. I don’t know. Well, this is the plane under the

00:34:13

rail, the

00:34:14

plane under the screw serge. Well, that’s all

00:34:17

again well, in the same plane as this

00:34:19

means the bed, you see. What is the essence of the

00:34:23

bed, it has three prisms, the

00:34:25

caliper does not ride on two, the rear headstock Prism is

00:34:30

flat, and in most

00:34:34

machines, the rear headstock prism

00:34:36

is located here, and the flat one here

00:34:39

is mirrored here, and the rear headstock prism

00:34:42

continues to appear for

00:34:44

installation of the

00:34:46

front headstock of the

00:34:48

front headstock, therefore, the moment is such that

00:34:51

in order to preserve it, it is necessary to

00:34:53

simultaneously

00:34:55

remove it from the prism and from the plane, so that later the

00:35:00

person reduces the size, you see, the front

00:35:04

headstock here stands on the prism of the plane, there

00:35:08

is no Piglet here, and here you can see the

00:35:12

Tide O is visible as I stood, you need to be

00:35:16

quite neat and accurate in terms of shooting,

00:35:19

so I have already done it.

00:35:22

I have already done the traditional

00:35:25

front flat,

00:35:30

rear flat, I have

00:35:33

climbed it in a small circle and

00:35:37

now we are going to make the caliper, we

00:35:40

will definitely do it in this sequence. We will

00:35:43

first make the calipers, and we will leave the rear headstock

00:35:46

alone the end Well, somehow, there is a

00:35:49

little bit of production, the pant leg is raw Well,

00:35:52

so now a few words about the TV

00:35:54

320p machine, the machine is quite popular, the machine is

00:35:58

quite successful

00:36:00

for its age, there were machines at all,

00:36:03

I don’t know, probably in the 50s-60s,

00:36:07

but they survived to our time in good condition

00:36:09

ages are quite a few,

00:36:12

the most delicate detail in it

00:36:15

is its Spindle on

00:36:17

those bronze sliding

00:36:19

bearings, well, roughly speaking, on the

00:36:22

bushings, and yes, on its own Dimensions and on its own, this

00:36:26

quite successful frame is quite stiff,

00:36:30

its ribs are much

00:36:33

thicker than and they are rougher than in, say

00:36:38

and hard.

00:36:41

You see, it is more massive. At first, I

00:36:45

thought the courier drove it, I thought it was from Izhevsk,

00:36:47

but then

00:36:48

I picked up the correspondence with the client. Yes, you. 325

00:36:51

Well, I understood from this that this is not the case,

00:36:54

okay, now we will make the support ones, in the meantime, there is

00:37:01

another one waiting for us on the street,

00:37:03

they rushed to the

00:37:05

finish line on the second day,

00:37:10

TV 321 is ready, now we are shooting,

00:37:16

everything turned out

00:37:28

here, many planes turned out,

00:37:33

one second, third, fourth, fifth, sixth, seventh, eighth, ninth,

00:37:40

tenth, 11 12, 13, 14,

00:37:50

15

00:38:01

that's the finish line.

00:38:05

I've already cut the

00:38:08

ridges of the prism

00:38:12

[applause] I

00:38:13

was very upset. Now I'll show you

00:38:17

how to take it, by the way, and for three prisms,

00:38:22

so it's like this. It was

00:38:25

rounded.

00:38:28

If necessary,

00:38:29

let's

00:38:38

take

00:38:43

five more.

00:38:45

Now I'll show you the result.

00:39:12

I take it, yes,

00:39:15

0.35.

00:39:21

Here, I take a photo, I

00:39:23

give it to the client, so, so,

00:39:29

what’s up, the parish, here’s one more leg,

00:39:32

everything is as usual, the

00:39:35

party is standing by, the power is great,

00:39:45

everything is as usual,

00:39:48

the finish has been made, the

00:39:51

German circle with the white one has already

00:39:53

been sawed off, and a new one must be ordered.

00:39:56

Well, the same one hedgehog, only for two

00:39:59

prisms, not for three, but for two, well, now

00:40:02

we will shoot, it will

00:40:04

go, it seems like he would like to

00:40:08

whom I went to the pharmaceutical factory, I

00:40:13

made some

00:40:15

further on our cutting with pants legs. The

00:40:18

first time I do such a sanina,

00:40:22

well, you can see. Something old at first glance,

00:40:25

and

00:40:27

such a very interesting

00:40:30

Tide here

00:40:32

and there for 1 there is a

00:40:36

61 MS of the

00:40:38

72nd year, well,

00:40:42

you can see that this is an old-school machine, which means that it

00:40:48

will be quite high, and again,

00:40:52

three prisms and, again, with a hammer,

00:40:58

what are they doing here, are they

00:41:01

pressing some kind of bushings here, or are they the viburnum knocks out

00:41:03

the gas station, the devil knows it, the lower one is shorter. I have

00:41:07

already done it.

00:41:09

And now here the focus must be removed. The Circle must be moved to

00:41:13

move to Fortuna, and there it is just a

00:41:16

couple of tens of millimeters missing.

00:41:28

And this is the extreme and extreme right position of

00:41:32

the table. It is good that there is an opportunity to get out of the

00:41:36

position and

00:41:37

grind the back flat

00:41:41

so we're finishing it, I'm already sanding it

00:41:44

[music]

00:41:45

inside I told the client to press it,

00:41:50

wait a little more and

00:41:53

we'll do it, he did

00:41:57

n't want to, he

00:41:58

wants it already

00:41:59

[music]

00:42:05

Now how is the whole quest going, how is the

00:42:09

removal of the spindle going,

00:42:16

everything is very tight, not for nothing, they bought a

00:42:19

big machine

00:42:24

[music]

00:42:41

now up, we do

00:42:44

n't have enough movement along the Z axis

00:42:49

Well, we're doing it like this

00:42:56

ah-ah-ah [music]

00:43:18

now we're taking off the spitz

00:43:20

Well, that's all, people, the last

00:43:23

exploits on Larry's

00:43:25

plan of what doesn't fit

00:43:31

because I've already swung

00:44:17

like that, day two, the parish, the finish on the prisms,

00:44:21

now we'll finish that one flat,

00:44:24

and I

00:44:26

told the client everything Wait a little, I'll

00:44:28

do it for you in Fahrenheit, I don't want to, well, I

00:44:32

mean, you'll be forced to lower the ceiling with the handles,

00:44:36

and then lower it,

00:44:39

No, I don't want to, it's already like that on the favorite, they would

00:44:43

do it on the fly,

00:44:46

so what does

00:44:47

this indicate, right? it needs to be

00:44:50

finished. The favorite fit

00:44:55

so well. I also

00:44:57

sanded it as a bonus here and there, the flat plane here is

00:45:01

not at an angle like in most machines.

00:45:05

Well, everything is ready. Now we will take it off,

00:45:09

as always, first the machine is painted,

00:45:11

then they see that the geometry is worn out, and

00:45:14

then they bring it for grinding, they bring it

00:45:21

ready, the

00:45:23

LCD is

00:45:26

taken away

00:45:29

[ music]

00:45:31

yes, another board from Iveco scythe, but

00:45:35

this time it’s a little smaller and everyone goes meter

00:45:38

40. And it’s a meter long, it’s a

00:45:42

decent loss, so far it’s necessary, so let’s finish it, it slaps its

00:45:54

feet, it’s

00:45:58

getting to the end, it’s a

00:46:03

size smaller head than I’m

00:46:05

still doing We argued with Myroslav, she

00:46:08

says the same thing, but not the same thing. Because

00:46:11

if you put it on the rib, it will hit me on the chest,

00:46:14

and this one will hit the egg. That's

00:46:21

all, we're done.

00:46:29

24 hundredths. I

00:46:31

took off these heads. They should never be twisted.

00:46:38

They poured it decently. By the way, the price of

00:46:42

this head is more. than 100,000

00:46:44

hryvnias

00:46:47

for this second-hand oblique, it

00:46:52

means three

00:46:56

incomplete 30,000 dollars, the head with

00:46:59

valves cost

00:47:01

So here to polish three clearly, well,

00:47:09

again and again and again,

00:47:12

and we drive it away, it's

00:47:24

all such a mountain,

00:47:32

we go further,

00:47:35

such a small bee

00:47:38

It's a shorter distance it

00:47:45

wasn't worn out, I just refreshed it,

00:47:49

and all this from Emko is hardened to death,

00:47:55

that cast iron

00:47:58

shines like steel, and now we will

00:48:01

make a bed there, pants up to the height of the

00:48:03

shoulder

00:48:06

there. One corner you can see Prism 45 and the other I

00:48:10

don't know what's there 35 what's so 16 :20 Well, it would already

00:48:14

be a job for the favorite, well, if he really wants to, it

00:48:16

will be, but let's do it now, let's

00:48:22

go, dear guests, dear family, the bed of the

00:48:26

lathe m-ho m-ho here For the

00:48:32

gifted person

00:48:34

Yes, I won't do it by hand, it's written,

00:48:41

so let's go further

00:48:43

[ music]

00:48:44

Pay attention to the shape of the

00:48:47

rear flat guide, you can’t get there with anything,

00:48:51

unless you make some kind of sharp ruler,

00:48:54

you see a bright circle that will

00:48:57

fly by and will polish the carrier of

00:49:00

this part,

00:49:02

now further along the structure of the fabric, well, it’s

00:49:04

quite hard, rusty

00:49:07

[music],

00:49:08

so it’s a

00:49:10

different skin Prism I haven’t measured it yet this angle

00:49:14

but here 45

00:49:16

here 45 look how many minimum

00:49:19

45-45 the spoon is flat and here I don't know, well

00:49:22

we measure

00:49:24

There we grind here we follow Here we follow

00:49:29

Here we follow everything The rest is caught up then

00:49:32

we measure the pepper

00:49:34

who will be the CNC

00:49:36

we grind a little bit

00:49:40

the client will do with it I don't know

00:49:46

we grind Well, everything Klyovo is flat,

00:49:53

there is a cut on the rear tank,

00:50:15

here we have 45 45

00:50:19

and here we have

00:50:22

35

00:50:25

and here

00:50:30

and here 50 there

00:50:35

are many options

00:50:37

[music]

00:50:38

Maksym Andriyovych donated a circle

00:50:44

there for 35 there for 50

00:50:49

to pluck

00:50:57

small eyebrows along that profile There was

00:51:01

such a circle. The

00:51:05

whole part is for this one and accordingly here.

00:51:12

Now we will put flat and make

00:51:15

this one boilers,

00:51:19

and we will finish it according to ENCO

00:51:22

[applause]

00:51:24

the ridge of the prism.

00:51:42

Well, everything took [

00:51:47

applause], let's

00:51:51

continue our cutting,

00:51:54

dear guests, dear family. I don't like to

00:51:57

work on other people's machines and than already

00:52:00

on those that do not belong to me, but I have to

00:52:02

finish some tails, and so another

00:52:06

371. Everything, as usual, was not very worn,

00:52:12

about one and a half dozen more torn, but

00:52:15

they stopped in time. Well, everything is here, everything is as usual. we

00:52:27

give it with ZED glue by express delivery.

00:52:30

I don't know, it's already somewhere around 20 or

00:52:32

25 days old 51

00:52:35

371 371 m 711-a, such repairs were made. Well, in short,

00:52:40

everything is working as usual.

00:52:55

the head

00:52:57

looks like some kind of Chinese combine harvester or something or an

00:53:01

excavator six-cylinder

00:53:04

in-line

00:53:06

almost a meter long

00:53:09

Well, let's make it shorter, bye bye, let

00:53:19

's do it

00:53:27

further, dear guests, dear family, one more

00:53:30

bed, this is probably the last one, is there something

00:53:33

urgently delivered,

00:53:35

something 0.4 or something

00:53:38

shorter, prisms again,

00:53:42

part of the prism skinned

00:53:45

because there will be no way out. Circle here.

00:53:50

Well, here we have it. As they say, the sacred

00:53:53

millimeter

00:53:57

can be even more. I'll tell you later,

00:54:00

well, the plow's eyebrow. Oh, it doesn't stick

00:54:06

like that here, of course,

00:54:10

but here it's simple.

00:54:13

It's just something.

00:54:39

of the front, everything is

00:54:46

fine, one of the last

00:54:49

orders for Aunt Lera, which came to

00:54:52

us in

00:54:54

sunny Kharkiv from our colleague

00:54:58

Artem Hrytsenko.

00:55:01

Well, everyone recognizes the iron, no, the

00:55:04

spindle headstock from

00:55:07

Berta Artemova’s grandmother

00:55:10

needs to be polished. I still

00:55:21

decided to get the

00:55:24

spindle headstock from my flat grinder

00:55:26

372b, it’s already Berta, after all, it’s better not to grind it

00:55:30

on a planer. And yes, I

00:55:34

’ve done such work once, the

00:55:36

technique is unchanged, only the machine changes.

00:55:49

so in order, Artem milled the

00:55:52

sheet from below. It is parallel there

00:55:55

on the jack, so we are checking it

00:56:00

back.

00:56:25

they are reaming the

00:56:27

seat of the front

00:56:30

spindle bearing cups and so on, this base is

00:56:34

unchanged and it is polished. Now,

00:56:37

this adjustment is carried out with this

00:56:40

jack.

00:57:19

now it will

00:57:21

jump on the groove for lubrication

00:57:23

[music]

00:57:27

That's it, let's go.

00:57:31

I've already put

00:57:35

a dime here and it smoothly descends here and a half. You

00:57:39

can see that it's erased and

00:57:52

torn. Well, it's going steadily here, you see, but now we're also skating along the hole as it is along the hole Now I will try. You see,

00:57:54

I specifically moved it on the table in

00:57:57

order to now grab the indicator and

00:58:00

climb into the hole to ride,

00:58:04

so the result pleased me

00:58:07

with such a gap.

00:58:22

and so

00:58:25

on

00:58:28

0.55 degrees Well, what will it take for our

00:58:33

German Krug, who has served us

00:58:35

well, to do a decent job of this venture, I

00:58:41

specially

00:58:43

adapted this order to the very end,

00:58:46

then cancel the Krug and tell him Thank you, my

00:58:49

friend, everything worked out with you And so

00:58:54

what do we do, we do Next, with the

00:59:00

reverse cup, we grind

00:59:02

here and we grind here. I’ll tell you that here

00:59:07

it stuck more than it wore off, although the

00:59:12

eyebrow is visible. Well, it’s so-so, and here’s the bottom

00:59:17

[music],

00:59:20

it means as always Artem will do the same,

00:59:24

then adjust the headstock like me.

00:59:28

Well, here, here, here. in Poedovsky, this is how grandfathers

00:59:33

do it,

00:59:36

only one of the four holes gets in, and

00:59:39

the rest must be done like this, it

00:59:42

means

00:59:44

that we grind with a cup,

00:59:48

we will try to grind in one plane,

00:59:51

although it is not really important because he

00:59:54

will later use a headstock of some

00:59:57

kind as a ruler. Well, everything I did

00:59:59

means to us it is necessary to grind once

01:00:02

grind two grind three grind 4

01:00:06

comb the top freshen there will be

01:00:09

one and a half to two hundredths along the entire length of

01:00:12

these planes this time two of them should be

01:00:16

at least parallel ideally they should

01:00:20

be in one plane so that

01:00:22

it is in one plane that is when we

01:00:25

grind Up

01:00:27

to us it is necessary that here according to the micrometer in

01:00:30

four points it is the same here, well, it is

01:00:32

not so important, you emphasize. If

01:00:36

we say that it will be higher than that, let it be

01:00:39

Sotka 2-3. Let it be even 5, then it is nothing,

01:00:43

it will all be

01:00:45

adjusted to the headstock due to that

01:00:47

The main thing is that it should be equal, that is, in fact,

01:00:51

we are interested in the indicator of the size of ABC,

01:00:56

and accordingly, on the other hand, a1v1c1, they

01:01:00

can differ.

01:01:32

one here from the edge that once fell into a

01:01:36

sofa Well, accordingly, one here,

01:01:40

this is all production. And we will light everything, we

01:01:45

take it

01:01:49

here, it is already full,

01:01:53

oh, the

01:01:55

lubricant works

01:02:00

like that, the back side, the bottom,

01:02:03

only three dozen wants,

01:02:07

yes, on such an occasion, I made a

01:02:11

German circle at 55 degrees 45 and 45

01:02:16

55x55 and here we are sanding

01:02:26

the back side.

01:02:36

This was his last chord in that

01:02:40

German Circle, it was already soapy,

01:02:43

everything is already garbage

01:02:45

[music]

01:02:48

this is how to comb the top with this, I

01:02:56

don’t know the minimum, two or three hundredths.

01:03:08

as always,

01:03:18

now the ear is clean,

01:03:21

minimal Sparkle goes and we finish

01:03:24

[music]

01:03:29

The day went to this work

01:03:32

because the work is not typical for the

01:03:36

time being, it was displayed until the

01:03:38

bottom will be

01:03:41

until the Circle retouched

01:03:44

until two measures polished

01:03:50

and

01:03:57

we wash off the emulsion all over it,

01:04:15

I will manage with one hand

01:04:27

25 at

01:04:36

all ok

01:04:40

25.5

01:04:49

I didn't try to get to the same

01:04:53

plane here, I'll say right away there will be a few

01:04:55

hundredths of a skew 208.5,

01:05:10

that is, 3 hundredths is not parallel, it's higher than

01:05:14

that But well, that's what they say it's not

01:05:17

important, he still came to shave two

01:05:19

strips for adjacency and it it will

01:05:21

go like this, but it would fit, it's ready, this is how it

01:05:26

turned out

01:05:29

here,

01:05:31

yes, yes, yes,

01:05:41

here we have a mesh, well, a mesh is a

01:05:43

sign of lack and here of

01:05:57

success, Myroslav

01:06:00

once convinced me to

01:06:03

keep the magnetic plates from Lyra, my dears,

01:06:07

and I'll tell you that it worked a key role

01:06:11

in the sale because people need a

01:06:14

large flat grinder with a magnet

01:06:17

for one, we used the

01:06:20

other, we

01:06:22

also repaired where the coil was

01:06:25

punctured because with those side bolts, or

01:06:28

instead of these bolts, there were ordinary ones,

01:06:30

remember?

01:06:47

and we work, we grind with a couple of payments, and the

01:06:50

next work is

01:06:53

sharpening such knives, they are from extruders

01:06:56

that will make plastic,

01:06:58

so here it catches nails, bolts. Well,

01:07:03

this is another one of the best knives, there are very

01:07:05

badly hammered ones, well, the point is that it

01:07:07

just has a cutting edge that is already blunt,

01:07:11

no dents all of this, the main thing is

01:07:14

to restore the cutting edge, but as

01:07:15

practice shows, taking a millimeter

01:07:19

is solid, and the Ottawa side is not

01:07:22

parallel to here. Therefore, you will have to

01:07:25

display many knives every time,

01:07:28

two boxes.

01:09:16

By the way, the angle is 44

01:09:19

degrees. The

01:09:29

sine plate is at an angle in order

01:09:32

for the Circle to take the full width. They

01:10:03

zeroed a little faster and drove

01:10:08

two knives and straightened the Circle, because I took

01:10:11

a millimeter. Well, there are no other options. I don’t

01:10:14

know if there’s some kind of milling with an ilbor

01:10:17

high-speed head on a

01:10:21

milling machine.

01:10:24

Well, yes.

01:10:26

I wouldn’t say that it’s

01:10:28

worse, at first it’s rough, one and a half to

01:10:33

two hundredths per pass, that is, 50 moves have

01:10:37

a millimeter, then the

01:10:39

clean one, you see it warms up, but then we

01:10:42

go through the clean ones, we all come out

01:10:49

and you see what kind of specimens it’s just Trash,

01:10:57

two boxes

01:11:00

came out, that’s the

01:11:05

result,

01:11:19

and so

01:11:20

20 because here it is now 44 degrees, and

01:11:26

then there will be knives with a different angle. Well,

01:11:28

there, the mood is all the same, the ones that are shorter at this

01:11:32

angle,

01:11:33

that way, the work is

01:11:44

enough. You see how it is imported from the east

01:11:46

to restore this cutting edge with the wallpaper.

01:11:56

these knives had to be changed

01:11:59

because they do not bend

01:12:02

at 80 degrees. Well, all this is only at

01:12:07

80 degrees

01:12:12

on that goat's milk

01:12:16

to collect

Description:

[email protected]

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "Остання нарізка від Лєри" video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "Остання нарізка від Лєри" video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "Остання нарізка від Лєри" video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "Остання нарізка від Лєри" video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "Остання нарізка від Лєри"?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "Остання нарізка від Лєри"?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.