Download "08.10 - 09.10.2016 Установка пластиковых окон в газобетон"

"videoThumbnail 08.10 - 09.10.2016 Установка пластиковых окон в газобетон

✔️ТЁПЛЫЙ ПОЛ в ГАРАЖЕ! Греющий кабель.

✔️ТЁПЛЫЙ ПОЛ в ГАРАЖЕ! Греющий кабель.

Channel: ТЯП ЛЯП

Лазерный уровень и вспомогательное оборудование KAIWEETS

Лазерный уровень и вспомогательное оборудование KAIWEETS

Channel: Fishka toolS

ГЕНИАЛЬНЫЕ ПРИСПОСОБЛЕНИЯ для работы, КОТОРЫЕ КАЖДЫЙ МОЖЕТ СДЕЛАТЬ СВОИМИ РУКАМИ

ГЕНИАЛЬНЫЕ ПРИСПОСОБЛЕНИЯ для работы, КОТОРЫЕ КАЖДЫЙ МОЖЕТ СДЕЛАТЬ СВОИМИ РУКАМИ

Channel: Полный DIY

Портальная дверь в кухне-гостиной #shorts

Портальная дверь в кухне-гостиной #shorts

Channel: Олег Тимофеев Строитель в Питере

стройка

газобетон

пеноблоки

блоки

саморезы

шуруповерт

bosch

октябрь

шуруп

шурупы

окна

пластиковые окна

окно

пластиковое окно

анкерные пластины

анкерная пластина

дюбель

дюбели

дюбеля

доски

лазерный уровень

лазерный нивелир

нивелир

уровень

сверло

молоток

пена

монтажная пена

tytan

Tytan Professional

00:00:01

to make my work easier,

00:00:03

I secured two boards in the openings;

00:00:12

this immediately eliminates the need

00:00:21

to align the two planes, since the windows automatically rest against the

00:00:25

boards

00:00:26

and they will align and all I have to do is

00:00:29

set the horizon to the level; I did

00:00:36

n’t come up with this myself; I looked at

00:00:39

other people’s videos;

00:00:44

in fact, it’s a very good solution

00:00:47

if the walls straight, if of course the walls are

00:00:50

not straight,

00:00:51

then this solution will not work because the

00:00:56

house will not be sheathed on top with

00:00:59

insulation, then the edges of the wall will remain

00:01:07

inside and therefore I install the windows on the

00:01:12

edge, they are not Wookiees and I will put them on

00:01:20

anchor plates, they are ruined, but

00:01:28

because the dowels and turning in the edge

00:01:32

of the block and not just on one side, the block is

00:01:39

thick enough on the outside, on the

00:01:44

street side, it turns out that the

00:01:49

layer of aerated block is too thin for the

00:01:54

windows, I will install them

00:01:58

almost without disassembling them because I’m

00:02:06

somewhat afraid that I won’t

00:02:10

be able to assemble them later, it’s not a very convenient place for

00:02:15

me to work because there is no floor and

00:02:18

you will have to lift it all up from your

00:02:24

own stairs,

00:02:30

so I removed the

00:02:34

window from the frame that swings open; the

00:02:37

mechanism here is quite simple to

00:02:42

just take it out and the pin here is

00:02:54

removed from the bottom hinge of the frame and then,

00:03:01

accordingly, to put it in place

00:03:03

you will have to put it on the bottom hinge and

00:03:11

hammer the pin into place now I will

00:03:21

attach the anchor plates

00:03:30

included in the kit to the frame, but the anchor plates I had were

00:03:34

not very large, in principle they

00:03:41

correspond to GOST

00:03:42

because their thickness is one and a half

00:03:45

millimeters, but I decided to play it safe

00:03:48

because there are only four of them,

00:03:52

so I bought an additional 2

00:03:56

mm plate for each window, 550 by 200

00:04:02

mm, length and width

00:04:07

respectively, they are stronger, these

00:04:12

plates I will fasten to the

00:04:16

top of the window according to

00:04:24

the norm, 15 centimeters are stepped back from the edge

00:04:28

and between the plates there should be no more than

00:04:32

70 centimeters,

00:04:35

accordingly I will fasten the plate to the side edges

00:04:43

which are stronger, three pieces each, my

00:04:49

height is a meter forty meters, the

00:04:51

width is a meter 30, respectively, the

00:04:56

sides in each side there

00:04:58

will be three pieces of this plate and on top I will fasten

00:05:03

three pieces of these plates, my window

00:05:11

is formed

00:05:13

relatively evenly and the corners go to the top of me,

00:05:18

maybe I’m straight they will cling to the corners,

00:05:20

I’ll see how it works out in place,

00:05:25

and I’ll attach the side plates

00:05:30

to plastic coal for foam

00:05:35

and aerated concrete, respectively, and it

00:05:39

dodges

00:05:47

according to the standard

00:05:49

at least 60 centimeters 60 millimeters, I

00:05:53

’m sorry, in principle it

00:05:58

doesn’t make much sense to make trees too, aerated concrete, I

00:06:06

’ll also repeat that death is right in

00:06:11

I won’t be able to drive in aerated concrete

00:06:15

because the window will be placed on the edge and

00:06:20

from the street side the condition of the aerated concrete blocks

00:06:25

is not enough to hold the window firmly,

00:06:29

over time it can become loose,

00:06:34

so it’s better I decided to secure it with

00:06:38

anchor plates in the middle of the block,

00:06:42

this is a better solution in my case,

00:06:49

so I installed one anchor plate

00:06:55

technology the following: first,

00:06:58

a hole is drilled to drive the screw in

00:07:05

and then the

00:07:10

Internet will remain

00:07:13

pipes with a press washer in cases when

00:07:24

the plate is wide, I accordingly

00:07:28

drive 2 when a narrow plate is installed,

00:07:35

chasing one in principle is probably

00:07:39

enough, but I decided to play it safe after

00:07:42

all, two screws are held securely by that

00:07:48

1 so I I installed

00:07:54

three thick plates on the sides and

00:07:58

secured 3 on top, and even from the

00:08:03

plate itself you can see that it’s two millimeters and

00:08:07

it’s stronger

00:08:09

once again and it doesn’t bend, the one and a half

00:08:13

millimeters that came with the kit, if

00:08:17

you press it, it bends easily,

00:08:26

although in principle

00:08:27

they have enough strength

00:08:32

if there were a lot of them, but in my

00:08:36

kit there were only four of them for

00:08:38

one window.

00:08:44

Separately, I would like to say about the

00:08:47

supplied profile on which the

00:08:52

window rests and on

00:08:55

which the ebb is then screwed on,

00:09:01

which is installed outside the

00:09:03

solar part;

00:09:14

I

00:09:19

got cheaper windows,

00:09:24

using super cutting technology,

00:09:29

supplied in profile, three pieces for

00:09:34

each window,

00:09:36

strong guide, they are almost 15 centimeters, the

00:09:42

distance between them will have to be

00:09:44

foamed,

00:09:46

that is, the foam consumption will be more than the

00:09:51

entire profile that was placed in it was in

00:09:54

one piece, I installed the

00:09:59

window in the opening and temporarily I

00:10:05

put the top part on one screw so that it doesn’t

00:10:08

fall out and, accordingly, with a divine laser

00:10:16

level,

00:10:17

I look to see if the window is level; the

00:10:23

window, in principle, is level; the only thing is

00:10:27

that the right side is in the air and,

00:10:33

accordingly, this is the place I will

00:10:35

put

00:10:38

plates to level the

00:10:43

window; after

00:10:49

installing the window, I pre-marked the

00:10:52

places holes, then after removing the window, I

00:10:58

drilled

00:10:59

the hole to a larger diameter so that the

00:11:13

hole could be driven into it, preferably not too big

00:11:17

and not too small to make it to

00:11:20

divide, I like it to fit in relatively easily,

00:11:24

but at the same time it didn’t dangle, I used the drill at an

00:11:33

angle of less than 90 and now it can be seen that it fits the wall

00:11:43

from where it won’t go anywhere,

00:11:48

in fact,

00:11:50

I will install 9 dowels

00:11:53

and then put the window back in place

00:12:04

after installing the frame and the

00:12:08

opening window in place, the weight has balanced

00:12:12

and it became clear that my window sill is

00:12:18

still very uneven relative to the

00:12:22

horizon level, there is a difference

00:12:32

and therefore despite that that when the st

00:12:38

supply profile is

00:12:41

pressed, the window itself

00:12:44

is uneven and it is necessary to level it

00:12:49

horizontally so that the window opens

00:12:55

normally because in this position it

00:12:57

jams a little, so I leveled the window

00:13:04

as a lining, I used a piece of

00:13:08

organic glass; no wooden

00:13:19

linings can be used because

00:13:23

wood swells if it gets caught moisture

00:13:27

and the window can warp organic

00:13:32

glass,

00:13:33

also which plastic retains its dimensions better

00:13:39

over time, I will indicate that

00:13:46

after

00:13:48

15-20 years it is also aging, but you

00:13:56

still have to live until then,

00:14:00

if everything is done correctly, it will

00:14:04

stand for this period. Now I will fix the

00:14:09

window with screws and accordingly

00:14:16

it will remain just foam, so

00:14:20

I actually fixed the plate in place in our place,

00:14:30

I didn’t

00:14:33

turn it over to the corners, I

00:14:34

still decided to turn it over the wall itself,

00:14:50

and as a final step, the rain, as soon as I

00:14:57

started training, I checked with a

00:15:03

laser level again how the window stands,

00:15:09

you can see the same all the indicators

00:15:18

all the sides that are illuminated are in the

00:15:27

same position,

00:15:33

and before I aligned the window, I

00:15:38

jammed a little, but now it’s already

00:15:45

in place quite normally and the upper positions are in the ventilation mode,

00:15:55

there are no special problems as long as the window is

00:16:05

aligned, it also stands still, it doesn’t

00:16:10

open, it doesn’t slam Only

00:16:12

with the wind can the closed

00:16:16

position slam shut, so in fact,

00:16:21

now all that remains is to

00:16:25

cut down the window and you can start installing the

00:16:30

remaining windows;

00:16:34

this will be easier for me because I

00:16:37

know which follower what to do.

00:16:43

Yesterday I managed to install three windows in an

00:16:50

average of two and a half hours

00:16:52

installation of one window took me today, I

00:16:56

will remove

00:16:57

the boards that are fixed on the outside and

00:17:02

which accordingly

00:17:04

simplify the installation of the window, the window is installed in

00:17:11

two planes at once, it is installed as it

00:17:15

should sit and on quite straight, it was not

00:17:19

done correctly relative to the

00:17:24

horizontal and vertical levels,

00:17:27

respectively, all that remains is

00:17:31

to foam and I will do it today also

00:17:38

install the three remaining windows and if

00:17:43

I have time, I will also foam them. This, in

00:17:49

principle, is not helped by the temperature,

00:17:51

which in the evening the foam drops to

00:17:59

plus five degrees, it’s

00:18:02

starting to be plus five degrees, only

00:18:05

frost-resistant drunk didn’t

00:18:06

buy it yet, maybe if you foam me during the day, it

00:18:11

should set for the windows I

00:18:16

took

00:18:18

foam

00:18:20

that doesn’t expand much, again it’s not an

00:18:25

advertisement, it’s just that

00:18:31

makroflex Sava foam, which has a

00:18:34

small expansion,

00:18:36

was not available, so I did it at a

00:18:39

narrow temperature at which

00:18:47

one complex job is working, the back is plus 5 and

00:18:50

higher,

00:18:51

respectively, in the evening I ca

00:18:55

n’t handle it anymore because the temperature

00:18:57

drops almost to zero and during the day it still stays

00:19:03

+ 8 + 10 let’s see how much

00:19:09

one cylinder will last and so I sawed down

00:19:14

three windows from the outside,

00:19:23

one cylinder still hasn’t

00:19:28

run out and I’ll foam from the

00:19:34

inside I’ll see how long it really

00:19:39

lasts and that’s it, I didn’t get the gun, it’s not

00:19:43

very high quality, they let it pass at the

00:19:46

base for some reason you have to

00:19:50

periodically

00:19:51

remove the foam from there;

00:20:16

different thicknesses and where it’s even possible there are

00:20:20

small gaps,

00:20:22

so using foam on both sides

00:20:26

is a better solution to

00:20:32

foaming correctly on one side is not

00:20:37

enough, strangely enough, one

00:20:44

cylinder was enough for all three windows, I

00:20:48

pinned it from the

00:20:49

inside, too, the only thing I haven’t installed yet

00:20:57

window sill and side elements slopes

00:21:03

like they are called so because of this

00:21:10

most likely the

00:21:12

consumption of foam is a little less buff, in

00:21:19

principle

00:21:23

it is still a little swollen but not as

00:21:27

much as regular foam and will fill all the

00:21:31

cracks I won’t even install a possible window sill

00:21:38

this year, and even more so

00:21:41

all other elements, then decorative

00:21:44

functions, you will only need to

00:21:50

cut off the foam from the outside and cover it with boards from the

00:21:55

sun

00:21:56

so that the foam does not crumble

Description:

Весь теплый сезон потратил на постройку бани, а вернуться к работам над домом удалось только сейчас. Видео про то как я установил пластиковые окна в еще нежилой дом.

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "08.10 - 09.10.2016 Установка пластиковых окон в газобетон" video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "08.10 - 09.10.2016 Установка пластиковых окон в газобетон" video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "08.10 - 09.10.2016 Установка пластиковых окон в газобетон" video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "08.10 - 09.10.2016 Установка пластиковых окон в газобетон" video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "08.10 - 09.10.2016 Установка пластиковых окон в газобетон"?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "08.10 - 09.10.2016 Установка пластиковых окон в газобетон"?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.