Download "Hammer Restoration [With Resin Eye]"

When I restored the old rusty hammer head, I had to soft anneal, Sandblasting, grind, file, harden, hand sand and polish the metal. The hammer handle I made new, for this I used ash. For good measure, I filled the eye of the hammer with resin, which added a lot to the look. Please also note that this video is not only to quickly show someone how something works, but also to relax and unwind from everyday life! ------------------------------------------------------------ ▶ What did I do ?! ◀ The old, rusty hammer head was already heavily rusted, which could be seen from the pitting. To remove the rust, I decided to use the process of electrolysis. Soft annealing allowed me to work the hammer head better because the surface was no longer so hard. To do this, I heated it to 700 °C and let it cool slowly. In the next step, I ground, sandblasted, polished and painted the hammer head. It was also hardened again at 900°C and tempered three times at 200°C. The hammer handle was made on the lathe, rubbed with linseed oil varnish and the hammer eye was filled with resin. Now the old rusty hammer shines again in its "Forgotten Shine"! ------------------------------------------------------------ ▶ Good to know ◀ I used the following tools: Wire brush, laboratory power pack, salt, scrap metal, brush, wire, string, side cutters, hardening furnace, forging pliers, belt sander, file, sandpaper, multifunction tool, milling pencil, sandblasting cabinet, corundum as blasting medium, immersion heater, oil, oven, polishing stand, polishing paste, knife, adhesive tape, spray paint, isopropanol, lathe, chisel, saw, wood glue, pin punch, resin, linseed oil varnish. ------------------------------------------------------------ ▶ Special thanks to my channel members! ◀ - ------------------------------------------------------------ ▶ Do you want to support me? ◀ Do you want to become a channel member? Then you can do it here: https://www.youtube.com/channel/UCwBnXlOxxt2MC5tZhyr2JQw/join You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal: https://www.paypal.com/donate?hosted_button_id=C3NBENWZT56DG ------------------------------------------------------------ ▶ Did you like it? ◀ Did you like the video? Then like, subscribe and share it, please! Thanks a lot!