Download "Reviewing of LED DC 5V~30V Dual MOSFET Control Cycle Trigger Timer Delay Relay Module_UPDATED 2021"

Reviewing of DC 12V 24V Dual MOS LED Digital Time Delay Relay Trigger Cycle Timer Delay Switch Circuit Board Timing Control Module DIY_UPDATED 2021 0.1 seconds (min) to 999 minutes (max) continuously adjustable. Program P1.1 07:47 Program P1.2 10:36 Program P1.3 12:31 Program P-2 15:10 Program P3.1 18:05 Program P3.2 21:16 Program P-4 26:05 Program P-2 30:04 This product is easy to use, many functions, but all buyers need to carefully read the instructions, very useful product. Module characteristics and uses: 1. To achieve fast turn-on and off the circuit, an unlimited number of switching; 2. Conducting and cutting process does not produce noise, no spark, no electromagnetic interference; 3. Compared with electromagnetic relay products, longer life; 4. The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature, operating current of up to 15A, power up to 400W, to meet the most use of the equipment; 5. A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient. Highlights: 1. Wide voltage input (5 ~ 30V), most devices can be used, very convenient; 2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs; 3. The emergency stop function (“STOP” key);With reverse polarity protection, reverse polarity will not burn the product. 4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up; 5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved; 6. After the module is powered down, all parameter settings are not lost. Product parameters: 1: Operating voltage: 5--30V. 2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system's anti-jamming capability (customers can also shorting common ground). 3: Output capacity: DC 5V - 30V, at room temperature, continuous current 15A, power 400W! Enhance heat dissipation conditions, the maximum current up to 30A. 4: Quiescent Current: 20mA; Operating Current: 50mA 5: Life: any switching times; Working temperature: -40-85 °; Size: 6.0*3.4*1.2cm. 6: With optocoupler isolation, enhanced anti-jamming capability, industrial grade board. "STOP" button extensions: Relays enable mode: 1. ON: Relay allows conduction in the "OP" on-time; 2. OFF: relay prohibit conduction is always closed; In the main interface, short press the "STOP" button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, click off the relay) Sleep mode: 1. "C-P" Sleep mode: five minutes without any operation, the digital display automatically turns off, the program running as usual; 2. "O-d" normal mode: digital display always open; Press the "STOP" button for two seconds and then release to switch "C-P" and "O-d" state, in which the current state of flashes and then return to the main screen. https://www.aliexpress.com/item/1005001988221991.html?spm=a2g0s.9042311.0.0.27424c4dqOzJEx WARNING: This video is for demonstration and educational purposes only. Each demonstration presents risks and hazards that must be fully understood before attempting. And should be performed only by professionals Disclaimer: The information, demonstration, and any content contained in this video are for informational purposes only. PLEASE READ Warning… do this at your own risk. I am not responsible for what you do to your device. MUSIC: Track title: Kurt From: YouTube Audio library IMAGE: Quranic Dua #35 (Surah al-Ahqaf) From: https://quranicquotes.com/topic/dua/page/2/ I have approval from the site https://quranicquotes.com to use the images