Download "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя."

"videoThumbnail Водопровод своими руками, установка инсталляции, подключение полотенцесушителя.

0:00

Начало

0:34

Перенос счетчика

1:35

Утеплитель на стояки

2:05

Подключение инсталляции к канализации

3:06

Штробление стен под водопровод и канализацию

4:17

Монтаж полипропиленового водопровода

8:35

Фиксация водопровода и канализации

9:15

Подключение полотенцесушителя

12:58

Установка инсталляции

15:11

Стоимость работ по монтажу водопровода

Раскладка плитки. Разные варианты и как можно накосячить.

Раскладка плитки. Разные варианты и как можно накосячить.

Channel: Ремонт квартир Омск

Инструмент для ремонта в ванной. С чего можно начать?

Инструмент для ремонта в ванной. С чего можно начать?

Channel: Ремонт квартир Омск

Какие сухие смеси применять при ремонте квартиры. Ремонт квартир Омск.

Какие сухие смеси применять при ремонте квартиры. Ремонт квартир Омск.

Channel: Ремонт квартир Омск

НЕ ДЕЛАЙ ремонт в ванной не посмотрев это видео.

НЕ ДЕЛАЙ ремонт в ванной не посмотрев это видео.

Channel: Ремонт квартир Омск

31 ошибка при поклейке плитки которые могут допустить мастера

31 ошибка при поклейке плитки которые могут допустить мастера

Channel: Ремонт квартир Омск

Цементная штукатурка своими руками в ванной

Цементная штукатурка своими руками в ванной

Channel: Ремонт квартир Омск

Электрика своими руками. Самый оптимальный вариант электропроводки.

Электрика своими руками. Самый оптимальный вариант электропроводки.

Channel: Ремонт квартир Омск

✅ НУ НЕ ОДНО, ТАК ДРУГОЕ... Как паять трубы, если вентиль не держит воду? / Ремонт сантехники

✅ НУ НЕ ОДНО, ТАК ДРУГОЕ... Как паять трубы, если вентиль не держит воду? / Ремонт сантехники

Channel: Пятница 7: СДЕЛАЙ САМ

Сборка щитка в квартире. Электромонтаж.

Сборка щитка в квартире. Электромонтаж.

Channel: Ремонт квартир Омск

Заказчик и мастер. Как взаимодействовать, что бы ремонт был закончен.

Заказчик и мастер. Как взаимодействовать, что бы ремонт был закончен.

Channel: Ремонт квартир Омск

Водопровод

Водопровод своими руками

полотенцесушитель

подключение полотенцесушителя

установка инсталляции

полипропиленовый водопровод

водопровод в квартире

водопровод в ванной

ремонт квартир омск

отделка омск

ремонт в новостройке омск

водопровод омск

полипропилен омск

сколько стоит водопровод

работы по водопроводу

монтаж полипропиленовых труб

как паять полипропилен

не дорогой водопровод

разводка труб

трубы в ванной

эконом водопровод

00:00:01

tell you how I make plumbing

00:00:03

by connecting a heated towel rail, how

00:00:05

we install the installation and many other

00:00:07

interesting things, this is already the fifth Rolex of

00:00:10

the object where I’m currently doing repairs on

00:00:12

which I film all the stages from start to

00:00:14

finish at the end I’ll tell you how much this

00:00:16

work costs, enjoy watching for a start

00:00:19

you need to understand where you will

00:00:21

have a bathroom sink, a

00:00:22

water heater, a washing machine, but you also

00:00:25

need to understand where

00:00:27

access to the meters will be located and in most

00:00:29

cases it is in an inconvenient place and

00:00:32

for good reason it needs to be moved at

00:00:34

this site, the pipes with the meters were

00:00:36

cut off by a grinder and digested in a

00:00:38

new place, in most cases, this

00:00:41

work can be ordered from a local

00:00:42

management company, especially if you are

00:00:45

renovating a new building. In our

00:00:47

case, the work cost 2,000 rubles, 500

00:00:50

rubles per seam. There are also more complex

00:00:53

jobs, such as moving a

00:00:54

heated towel rail riser and so on,

00:00:56

the advantage of local plumbers over

00:00:58

council welders the fact is that they will not

00:01:00

disappear and if you fix something your

00:01:02

jamb, the welding places need to be protected from

00:01:05

corrosion, it is possible to make an example of a

00:01:07

regular and small PPF, or like me,

00:01:10

using a spray can for the price it

00:01:12

comes out the same only with a spray can it

00:01:14

dries faster and not so it stinks for a long time

00:01:19

beforehand on the sewer pipe,

00:01:21

I installed sound insulation, it really

00:01:23

helps against excess noise in the van, it is

00:01:26

indispensable since the greatest noise

00:01:28

is caused by flushing the toilet, especially at night, we will sing a

00:01:30

more detailed video, it will also be

00:01:33

in the description below

00:01:35

before the welding work, the

00:01:37

thermal insulation was removed from the plow, now you need to put

00:01:40

it back it is necessary then to

00:01:42

prevent condensation on the pipes,

00:01:44

this is especially true on a riser with cold water; it does

00:01:46

not reduce the noise

00:01:49

level if you have a sewer pipe without noise; this is why it

00:01:52

is worth installing thermal insulation made

00:01:54

of foamed polyethylene on it;

00:01:55

thermal insulation is attached using

00:01:57

plastic ties; the whole video is in

00:02:00

exact chronological order OK, someone

00:02:02

can carry out the work in a slightly different

00:02:04

sequence; the

00:02:05

next step is connecting the

00:02:07

sewerage installation; first of all, you

00:02:09

should set the installation according to the height;

00:02:12

installations are different; often on the

00:02:15

frame itself there is a mark that should be at a

00:02:17

height of 1 meter from the finished floor; the finished

00:02:20

floor is the height that will be after

00:02:22

gluing the tiles in this installation that when

00:02:24

installing such a mark there was no such mark, I

00:02:27

understood that its upper edge is this

00:02:30

very mark, to be on the safe side

00:02:32

you can try it on so that the height of the

00:02:34

upper edge of the toilet is 40

00:02:36

centimeters from the finished floor 40

00:02:39

centimeters from the finished floor then it

00:02:40

is considered a standard, well, there’s a plus minus

00:02:43

a centimeter does not really matter, the height is

00:02:46

set using retractable legs

00:02:47

that are fixed with screws and after

00:02:50

that the sewerage pipes are brought to the installation

00:02:52

and I

00:02:54

saw off the end with a grinder

00:02:59

over the saw, I make a chamfer and so that the

00:03:02

pipes are easily joined I use

00:03:04

silicone grease

00:03:06

after it has been brought down for

00:03:08

uninstallation, I draw on the wall where the

00:03:10

grooves will be made in which

00:03:12

the pipes will be heated, there are many nuances, for

00:03:15

example, to the sink from the washing machine, I will

00:03:17

run a sewer with a diameter of 40

00:03:19

millimeters, but for the washing machine you can reduce it to 32,

00:03:22

this will allow you to make a groove with a

00:03:25

shallower depth; to the bathroom, you

00:03:27

need to use a sewer with a diameter of 50

00:03:29

millimeters babyono grooves play a role

00:03:32

if the wall is, for example, concrete or, as in

00:03:34

my case, behind this wall the

00:03:36

ventilation ducts of the wall are very thin,

00:03:38

half-brick and it is undesirable to break

00:03:41

through it, the most convenient way for this

00:03:44

work is to use a wall chaser,

00:03:46

its cutting depth is 45 millimeters, and

00:03:49

I will conduct water supply and sewerage in one pipe,

00:03:51

but it is not necessary depending on the situation, and it is also

00:03:54

advisable to carry out the work during the day in the evening; the

00:03:57

neighbors have already all come home from work and fragments of

00:03:59

brick can fly to them; ventilation;

00:04:02

all this work is carried out accordingly

00:04:04

after plastering the walls; this is a

00:04:06

good test for the quality of the plaster;

00:04:09

if it is not of good quality, this plaster

00:04:11

can peel off along the steel wall in

00:04:13

large layers

00:04:17

before screwing the fitting with the

00:04:18

meter, you need to make sure that there is no

00:04:21

water there since the water supply system will be

00:04:23

polypropylene, then when soldering with a soldering iron,

00:04:25

water getting into the heating fittings and pipes

00:04:27

can lead to it being

00:04:29

unreliable; twist the toilet paper into a

00:04:31

tube and insert the meter and

00:04:33

tapped so that the water runs down, you

00:04:36

will have to do this more than once until the

00:04:38

toilet paper stops getting wet,

00:04:40

now we screw the fittings in this

00:04:42

case, we have sealed meters,

00:04:44

so we need to work more carefully so as

00:04:46

not to break the seals, we wind the flax

00:04:48

clockwise, that is, the side in

00:04:50

which the fitting will be screwed It’s better to

00:04:53

screw on a little more than a little less so

00:04:55

that the fitting can be screwed on easier, so to

00:04:58

speak, slides along the flax from above, apply

00:05:01

silicone sealant, now we screw on the

00:05:03

fitting, I use an adjustable

00:05:06

wrench and adjustable pliers for this. Instead of an

00:05:08

adjustable wrench, you can use

00:05:10

regular ones, but adjustable pliers are

00:05:12

such a cool tool if you have one

00:05:14

no, you have to buy it, I

00:05:16

use it almost every day for

00:05:18

various jobs, I don’t know, and I’m a

00:05:20

generalist

00:05:22

and therefore they are not useful not only

00:05:24

when working with water supply with an adjustable

00:05:26

wrench, we fix the fitting of the opera meter with

00:05:28

steel pliers, we tighten the

00:05:30

combined coupling if you have little

00:05:32

experience then You can

00:05:34

use an American one instead of a combined coupling; if

00:05:36

you make a mistake, you can

00:05:38

fix everything with less consequences.

00:05:42

There is a recommendation to install the

00:05:43

water supply system of the installation tank and avoid

00:05:46

using hoses of the type they are unreliable.

00:05:49

Try not to neglect this. In

00:05:51

most installations, the

00:05:53

water supply fittings are fixed, but in this case

00:05:55

it turned out not to be that long will be

00:05:57

used already inside the installation tank, the

00:06:02

bath mixer will be connected to

00:06:04

such a fitting, the displacement or

00:06:06

connection is usually standard and

00:06:08

therefore the distance between the fittings is also

00:06:10

standard during the installation process, please

00:06:12

note that the connecting part must

00:06:14

be flat, if it is bent, then

00:06:17

the mixer will be difficult to connect when

00:06:19

I install mixer, then

00:06:21

leaving this ribbed part on the outside of

00:06:23

the plaster, you can heat it a little more, but it is

00:06:25

extremely important that the excess does not stick out, but you

00:06:28

may come across a non-standard mixer

00:06:30

with non-standard reflectors, so

00:06:32

it’s worth checking whether everything will connect without

00:06:34

problems, those eccentrics that will be

00:06:36

included with the mixer may be

00:06:38

long, but it is possible

00:06:40

sawing off the excess, it is clear that within reasonable

00:06:43

limits, as a rule, the liner to the

00:06:45

mixer comes from below, but in this

00:06:47

case, there is also such a fitting on the side

00:06:50

in stores; I didn’t come across it.

00:06:57

I’ll check the water supply, so to speak, the module is

00:07:00

soldered onto the water supply segment on the floor and

00:07:03

when it has already grown on the floor It’s

00:07:06

already inconvenient to work, then I solder

00:07:08

the water supply to the main water pipe, it’s assembled like

00:07:10

Legos, but there is a nuance, it’s very important not to

00:07:13

narrow the pipe, this is easy to do if you

00:07:16

hold the pipe in a soldering iron, I solder it like

00:07:18

this, I push the polypropylene parts onto the

00:07:21

soldering iron all the way, counting to five, I remove it

00:07:24

only by counting very quickly, twice

00:07:27

as fast than the seconds are ticking, this is how it

00:07:29

should be possible to

00:07:35

solder the segments in,

00:07:55

otherwise it is very important not to inadvertently

00:07:57

melt the neighboring pipes with a partner,

00:08:00

of course it would be more convenient

00:08:11

in some places the pipes intersect and

00:08:14

then you may need these

00:08:16

contours, they can be different, choose which

00:08:19

one is more convenient depending on the situation

00:08:25

plumbing in general, the spine sewer system is

00:08:27

assembled, now all this needs to be

00:08:28

fixed

00:08:35

first, I wet the grooves somewhere,

00:08:37

I fix both the pipes and fittings

00:08:40

since we have both cold and hot pipes

00:08:42

so that they do not transfer heat and cold to

00:08:44

each other, I blamed everything about it, and also this in

00:08:47

order for the pipes

00:08:49

to change their volume when the temperature changes, and it is impossible to

00:08:52

fix them rigidly in the wall, for example, with the same

00:08:54

plaster, but there is a nuance:

00:08:57

the fittings themselves that come out of the wall,

00:08:59

so to speak, the water sockets must still be

00:09:01

placed on the plaster so that they do not

00:09:03

dangle, for example that the same faucet

00:09:05

will dangle and the fittings are fixed with

00:09:08

foam,

00:09:15

now we connect the towel dryer

00:09:17

fittings, I use one-piece fittings, you need to

00:09:20

twist the flax for sure so that later

00:09:22

water does not drip with an American connection, you can

00:09:24

fix it to the network, but when you turn off the

00:09:27

hot water, it can leak; it will not be

00:09:29

tightened, and the American connection usually costs

00:09:32

much more expensive than permanent

00:09:33

connections, we also coat it with sealant;

00:09:42

here we can’t get by anymore; we’ll stop using

00:09:43

pliers; we need a gas wrench;

00:09:59

now we’re figuring out how to

00:10:01

connect the towels; there are a

00:10:03

lot of options; it all depends on what’s available

00:10:06

in the store; for example, I use corner

00:10:08

American ones; they have a problem with the

00:10:11

part with the nut very short

00:10:14

I didn’t find any other options, but you can

00:10:16

use an extension cord, the main thing is

00:10:19

that it is as beautiful as I’m

00:10:21

American, well, it’s smooth chrome plated,

00:10:23

these extension cords come in different lengths, you need to

00:10:26

take into account the size of the mount from the

00:10:28

heated towel rail, now we mark on the

00:10:30

wall where the outlets will be, I once made a heated

00:10:33

towel rail from the riser at a

00:10:34

maximum distance of probably 4 meters

00:10:36

and it warmed up, keep in mind that

00:10:39

in some houses you can’t use

00:10:40

polypropylene to connect a towel,

00:10:42

I’ve met such houses near a thermal power plant, a

00:10:45

local plumber says that the water in the

00:10:47

system reaches 110 degrees and

00:10:50

polypropylene will not withstand it, to be honest, it’s

00:10:52

strange how the water in the system above the

00:10:54

boiling point, but it happens in reality, I myself have seen

00:10:57

how it’s worth pouring water onto a pipe,

00:10:59

the heating above is already boiling if you have a

00:11:01

house like this, here the pipes should be steel

00:11:03

on a soldering iron, you need to change the nozzles to a

00:11:06

different diameter, strange thing, pipes

00:11:09

are measured in millimeters and threads in

00:11:11

inches can be in does this make any

00:11:13

sense if our water supply pipes were

00:11:16

20 millimeters, then the teens of the resident disappeared, they are

00:11:18

32 millimeters in diameter, by the way, I

00:11:21

completely forgot the pipes we have are reinforced with

00:11:23

fiberglass, take only such

00:11:26

reinforced metal ones, under no circumstances

00:11:28

buy

00:11:29

there is such a detail to make it easier

00:11:31

to align the towel evenly according to the level, you need to

00:11:34

solder the pipes so that one of the water

00:11:36

sockets can be moved left and

00:11:38

right and up and down, this is how I have

00:11:40

the upper part of it, you can move the sides a little, but

00:11:43

if the pipe from the riser is straight,

00:11:46

then you need to measure and solder very carefully so that

00:11:48

everything is level if you

00:11:50

move up and down and it turns out, then left to right is

00:11:52

no longer there. Now you need to

00:11:54

set up the towels, fix the

00:11:56

pipes so that after I sing them,

00:11:58

they don’t move until the foam hardens.

00:12:00

For convenience, I additionally fix the

00:12:02

towel with a wire to the dowel; the

00:12:06

towel has fasteners; its depth

00:12:09

adjustable, you need to figure it out so that a tile with glue

00:12:12

can fit between the fasteners and the wall; it’s

00:12:14

convenient to fix the pipes

00:12:17

using tile wedges; you need

00:12:19

the fitting to be flush with the future tile;

00:12:21

well, it would be preferable to

00:12:28

now cut out all the excess foam; you need to

00:12:31

cut it off so that the foam is not flush,

00:12:33

but slightly recessed so that There was

00:12:35

another nuance in the layer of plaster: if you

00:12:38

sit the pipes only on the plaster, then

00:12:40

such a thick layer will take a long time to dry. In

00:12:43

some cases, this is unacceptable. The

00:12:58

installation must be

00:13:00

leveled, firstly, and secondly, so that when it

00:13:03

is covered with plasterboard,

00:13:05

the plasterboard should be flush with the already

00:13:08

plastered ones. the walls themselves with

00:13:10

the help of cutting plasterboard and the rule is

00:13:12

all this and we set it up. Pay attention to

00:13:15

how the sewerage installation is connected.

00:13:21

When you drill a hole in the floor for the

00:13:24

dowel, check them with a screw to see if there is enough

00:13:26

depth; dust clogs the hole;

00:13:36

it is best to tighten the screws with a

00:13:38

hexagonal head with a ratchet, which I

00:13:40

unfortunately forgot in the car

00:13:42

It takes so long to do it with a regular key

00:13:44

that it’s probably easier to go to the car, but I

00:13:46

tightened the top fastening with this

00:13:48

universal key from

00:13:50

Aliexpress. I ordered it if I find

00:13:53

a link, I’ll write it in the description of the video.

00:13:54

The thing really sometimes really helps out is the

00:13:57

top right fastening, the pin that came with the

00:13:59

kit is not especially long, well,

00:14:02

as a rule, it’s enough, you can buy a

00:14:04

store for longer wines, it’s regulated

00:14:07

with a grinder, well, we take the extra ones and saw them off,

00:14:16

but there is another solution: instead of a long

00:14:19

hairpin, we use a profile, just

00:14:21

learn that the profile should be good,

00:14:23

for example, a ski channel and not some kind of

00:14:25

foil, a

00:14:28

hole in the wall you need to drill through the profile

00:14:30

as close to the fold as possible,

00:14:39

in addition to twisting the installation using

00:14:42

the drill itself,

00:14:47

and connect the installation, here’s the water,

00:14:50

before sewing everything up with plasterboard,

00:14:52

screw the plugs onto the sowing to the socket and

00:14:54

check if you have any water leaking

00:14:56

somewhere, how to sew it all up

00:14:58

with plasterboard and in general, about the different

00:15:00

options for attaching drywall and

00:15:01

profiles that I used in this

00:15:04

apartment, I will show you in one of the following

00:15:05

videos, maybe you will come across something

00:15:08

original so as not to miss, subscribe to the

00:15:10

channel now about the cost of work,

00:15:13

plumbing costs one and a half thousand rubles,

00:15:15

each water socket in their apartment is 14 pieces and

00:15:18

moreover 21,000 installation installation 2,000

00:15:22

sound insulation grooves 1,000 rubles each in

00:15:24

an apartment there are 2 of them in total 2,000 and all together

00:15:27

the work cost 25 thousand rubles materials

00:15:30

for the water supply system without a payer

00:15:32

Shumka installation came out to about 14 thousand

00:15:34

here I also filmed work with the water supply system

00:15:37

in the kitchen but this video decided not

00:15:39

insert, maybe I’ll make a video like a

00:15:41

time lapse with pleasant music and in the hall on the

00:15:43

channel, but only with the opportunity

00:15:45

to watch with a sponsor there, it won’t be

00:15:48

quite my format, well, at least as

00:15:50

I imagine it, next

00:15:52

week I’ll most likely make a video about

00:15:54

assembling an account, all good luck with that

00:15:57

goodbye repairs

Description:

В этом видео расскажу и покажу как делать водопровод, с помощью полипропилена, своими руками. Так же покажу как установить инсталляцию. Как подключить полотенцесушитель. Сколько стоит работы по монтажу водопровода. Ремонт квартир, офисов, домов. Тел. 8-908-315-0913 Андрей Универсальная насадка на шуруповерт - https://ali.onl/1F8f 00:00 - Начало 00:34 - Перенос счетчика 01:35 - Утеплитель на стояки 02:05 - Подключение инсталляции к канализации 03:06 - Штробление стен под водопровод и канализацию 04:17 - Монтаж полипропиленового водопровода 08:35 - Фиксация водопровода и канализации 09:15 - Подключение полотенцесушителя 12:58 - Установка инсталляции 15:11 - Стоимость работ по монтажу водопровода Плейлист с этапами ремонта - https://www.youtube.com/watch?v=PJmGXdeU43Q&list=PL2AIEEnqaEkmq0n4HdhtaB78mEgXKrIHC Предыдущие этапы ремонта в этой квартире: Возведение стен - https://www.youtube.com/watch?v=PJmGXdeU43Q Штукатурка стен - https://www.youtube.com/watch?v=wmKGa8N9AQ0 Присоединение лоджии - https://www.youtube.com/watch?v=iNaF11avpcY Электромонтаж - https://www.youtube.com/watch?v=FspfkBUBvx4 Ссылка на instagram – https://www.facebook.com/unsupportedbrowser Ссылка в группу ВК - https://vk.com/club99755342 Ссылка в группу в Одноклассниках - https://ok.ru/group47220735148074

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя." video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя." video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя." video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя." video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя."?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "Водопровод своими руками, установка инсталляции, подключение полотенцесушителя."?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.