Download "GRIM REAPER MICRO HYBRID Broadhead Test"

"videoThumbnail GRIM REAPER MICRO HYBRID Broadhead Test

0:00

Intro

5:00

Micro Hybrid

7:04

MDF Test

7:34

Steel Test

9:50

Cinder Block Test

12:12

Final Thoughts

Setup ANY BOW! | Archery HOW TO

Setup ANY BOW! | Archery HOW TO

Channel: Average Jack Archery

Best Broadhead Battle 2021

Best Broadhead Battle 2021

Channel: Bloodlines Archery

EASIEST Tuning Method | Possibly of ALL TIME? | Get perfect broadhead flight the SIMPLE way!

EASIEST Tuning Method | Possibly of ALL TIME? | Get perfect broadhead flight the SIMPLE way!

Channel: Average Jack Archery

Elite Carbon Era | Review and Speed Test! | Elite Archery 2023

Elite Carbon Era | Review and Speed Test! | Elite Archery 2023

Channel: Average Jack Archery

FOUR sights in ONE?! | CBE Engage Hybrid 3 Pin

FOUR sights in ONE?! | CBE Engage Hybrid 3 Pin

Channel: Average Jack Archery

FLETCH FIGHT: FOB vs VANES

FLETCH FIGHT: FOB vs VANES

Channel: Lusk Archery Adventures

How I Tune EVERY ARROW I Shoot!

How I Tune EVERY ARROW I Shoot!

Channel: Average Jack Archery

Grim Reaper

Broadheads

Broadhead

Broad

head

Micro Hybrid

Hybrid

Mechanical

Fixed

Blade

test

Deer

Elk

Moose

Hogs

Pigs

Hog

Pig

Bowhunting

Archery

Bow

arrow

bow and arrow

bowhunter

bowhunt

hunt

hunting

g5

Bloodsport Archery

Rage

Slick Trick

Muzzy

Magnus

Zeus

Thorn

Sevr

Afflictor

Wasp

Gravedigger

00:00:01

[Music]

00:00:06

today I'm going to be testing a couple

00:00:09

new heads that have come out from grim

00:00:11

reaper and you've probably noticed grim

00:00:13

reapers been on the market for a while

00:00:15

and they've gotten quite a following

00:00:16

i've used them and taken quite a few

00:00:18

animals with them from turkey to hogs to

00:00:22

deer and they've always performed really

00:00:24

well for me but now they've come out

00:00:26

with a couple new additions to their

00:00:29

lineup oh and they have quite lineup

00:00:31

they've got a lot of choices but they

00:00:32

come out first of all with their Pro

00:00:34

Series which utilize an extra super

00:00:37

wicked looking sharp tip okay that's

00:00:40

like it looks pretty tough and then

00:00:42

they've also come out with their micro

00:00:44

series and I really like these micro

00:00:46

series because they're designed for

00:00:48

exceptional flight they've they've

00:00:51

shortened the overall head so they have

00:00:53

a reduced surface area and are supposed

00:00:55

to fly even better so they do that with

00:00:57

the micro Hades I'm going to be testing

00:00:59

that one later but today I'm going to be

00:01:01

testing the micro hybrids and the micro

00:01:05

hybrids are really cool they come in 100

00:01:06

grains as well as 125 grains and they

00:01:09

have three different models of each of

00:01:12

them first of all you'll notice that

00:01:13

they have this short design that's the

00:01:15

micro if you look at their normal

00:01:17

hybrids they're quite a bit longer so

00:01:19

again that's going to aid in flight but

00:01:21

then in terms of the cut they have three

00:01:23

different choices this is the smallest

00:01:26

one it has the one in one quarter inch

00:01:28

wide mechanical heads when deployed the

00:01:32

fixed heads are the same in all of them

00:01:34

they're there one in 1/16 inch those

00:01:36

don't change so you're always going to

00:01:38

get at least that kind of a cut but then

00:01:40

you get in this this mechanical cut you

00:01:42

get the one one quarter and this one you

00:01:45

get a one and three-eighths inch cut so

00:01:47

you're getting a bigger cut there in

00:01:49

that one you can see the difference then

00:01:51

they also make one that's a one and

00:01:53

three-quarter inch cut so it goes one in

00:01:56

one quarter one in three eighths one and

00:01:58

three quarter and that one would be

00:02:00

really great for smaller game or really

00:02:04

high kinetic energy setup I like the way

00:02:06

that there's three different choices

00:02:07

based on your quarry and based on your

00:02:10

kinetic energy

00:02:11

this smaller one would be great for

00:02:13

lighter kinetic energy setups or for

00:02:17

bigger animals this medium one is a good

00:02:19

all-purpose head and then you've got the

00:02:22

bigger one the one and three-quarter

00:02:23

inch cut which would be really great for

00:02:25

like turkeys or or deer or smaller hogs

00:02:28

things like that bear or for higher

00:02:30

kinetic energy setups as I said earlier

00:02:32

so I like the way that there's a lot of

00:02:34

choices and you can see this proseries

00:02:35

tip and those are like wicked I wish you

00:02:38

could kind of zoom in there and see that

00:02:40

but but on a smaller one they have a

00:02:42

little bit shorter tip than on this one

00:02:45

and man that longer tip there just looks

00:02:48

like killer okay so I'm excited to test

00:02:51

these out I'm going to shoot them at

00:02:52

longer range and see how well they do

00:02:54

let's say out to like sixty eighty yards

00:02:56

and see if they fly as advertised and

00:02:59

then I'm going to be putting them

00:03:00

through all the ringers that I do for my

00:03:02

other mechanical heads I'm gonna sue

00:03:04

them through my my layers of MDF half

00:03:07

inch layers of MDF which with a little

00:03:10

rubber foam mat in the front to simulate

00:03:13

hide and I want to see how well these

00:03:15

open sometimes with an over-the-top

00:03:17

opening head like that you don't get

00:03:20

very good opening holes so I'm gonna see

00:03:23

that I'm also gonna see how well they

00:03:26

they penetrate it'll be interesting to

00:03:28

see that for a hybrid head how well it

00:03:31

penetrates that's a lot of kind 2.3

00:03:34

inches of total cut two point four

00:03:36

inches of total cut that's a lot of cut

00:03:38

so I'm interested to see how well it

00:03:40

penetrates with that and I'm really

00:03:41

interested to see how well the blades

00:03:44

and the tip and the whole head hold up

00:03:46

so I'm gonna shoot him through the MDF

00:03:48

then I'm gonna put them in an angle 45

00:03:49

degree angle put the head the wood at a

00:03:51

45 degree angle and see how well they

00:03:54

enter that wood at a 45 degree angle

00:03:56

then I'm gonna shoot him through steel

00:03:58

plate and if they're still doing well

00:04:00

and I don't know if they will be at that

00:04:02

point I'm gonna go ahead and put them

00:04:04

into a cinder block just because it's

00:04:06

always good to test kind of a zero

00:04:09

penetration test to test the overall

00:04:11

integrity of the head it's definitely

00:04:14

not essential for hunting purposes but

00:04:18

the better it does on handle on cinder

00:04:20

block well the better it's going to do

00:04:22

on handling a big femur or something like

00:04:25

that you know or a headshot or whatever

00:04:27

so it's kind of fun just to test them so

00:04:29

I'm going to see what happens with these

00:04:32

heads let's put them through it and see

00:04:34

what happens

00:04:38

[Applause]

00:04:47

[Music]

00:04:59

you

00:05:01

first let's go with the 1 and 1/4 inch

00:05:04

micro hybrid now the 1 3/8 inch micro

00:05:09

hybrid here you can see the entrance

00:05:12

hole of both of them and you see the

00:05:15

fixed blade cut as well as the other

00:05:19

blade deployed the mechanical did deploy

00:05:22

a bit more than I expected we'll pull it

00:05:24

apart and measure it then in terms of

00:05:27

penetration they both blew through the

00:05:29

first layer of MDF and then they

00:05:33

embedded quite well in the second layer

00:05:36

I don't know if you've seen many of my

00:05:38

tests but not a lot of them embed that

00:05:41

well in the second layer especially when

00:05:43

there's such a big cut here you can see

00:05:46

the entrance of the two heads and you

00:05:49

get the full fixed blade cut there go in

00:05:52

long ways in both of them and then in

00:05:54

terms of the mechanical it deployed and

00:05:58

measured out to 3/4 of an inch so

00:06:01

actually that's not bad for over-the-top

00:06:05

deploying ahead to open up 3/4 of an

00:06:08

inch on the initial impact especially

00:06:11

into a soft medium like this that's more

00:06:14

than I would have expected let's see how

00:06:15

it penetrated through the rest of the

00:06:17

medium after that initial layer of mat

00:06:19

this is the entrance into the first

00:06:21

layer of MDF and you can see that the

00:06:24

mechanical portion has opened up to just

00:06:27

about an inch so it hit the foam at it

00:06:30

opened up to three-quarters of an inch

00:06:31

and then by the first layer of MDF it's

00:06:35

almost exactly one inch both of the

00:06:38

heads after going through the mat and

00:06:41

the first layer of MDF in embedding in

00:06:44

the second layer of MDF they blew a

00:06:47

really nice hole to blow the blades open

00:06:49

fully by the back of the second layer of

00:06:53

the first layer of the MDF blew a nice

00:06:56

hole in the heads still are in pristine

00:07:00

condition you can't even tell that

00:07:02

they've been fired yet that's really

00:07:04

pretty impressive now I'm going to shoot

00:07:05

these at a 45 degree angle into the MDF

00:07:08

and first I'll go with the micro hybrid

00:07:13

1/4 inch and now the 1 and 3/8 inch so

00:07:20

here you can see the heads blew through

00:07:22

the first layer and an angle they stuck

00:07:24

in the hidden slide at all they didn't

00:07:27

reach the second layer but they did

00:07:30

penetrate well and it looks like the

00:07:32

blades all held up really well in here

00:07:34

so far these heads have shown very

00:07:36

little signs of wear after going through

00:07:38

a couple layers of half-inch MDF one at

00:07:41

an angle and one straight so now I'm

00:07:43

gonna test them through this steel plate

00:07:44

first the 1 and 1/4 inch now the 1 3/8

00:07:48

inch it was kind of cool I can smell the

00:07:51

burning from some sparks fly in there

00:07:54

here's the penetration through the steel

00:07:56

and through that layer of MDF and also

00:08:00

the foam mat in there you can see that

00:08:03

both broke through the back of that

00:08:05

layer of MDF it's a good look at the

00:08:09

heads and how they cut through the steel

00:08:10

you can see the heads are still embedded

00:08:12

in that layer of MDF down below it will

00:08:15

pull them out in just a second but here

00:08:17

you can see the blades as they cut

00:08:20

through that steel you can see it made a

00:08:22

nice hole but you can also see the cuts

00:08:25

themselves of the main fix blade as well

00:08:28

as the mechanical blades both went

00:08:29

through that so I'm curious to see how

00:08:31

they held up

00:08:32

it looks like the larger one the one in

00:08:35

3/8 inch got a little bit of a bend in

00:08:37

the end of one of the blades there on

00:08:40

the right the other may be a slight bend

00:08:43

in that same blade to the rest the head

00:08:45

so far after going through a couple

00:08:48

layers actually a few layers of MDF half

00:08:50

inch MDF and that steel plate this is

00:08:53

the larger one on the left the one 3/8

00:08:55

inch you can see the the tip is still in

00:08:59

excellent shape and then you can see

00:09:01

that one blade the one mechanical right

00:09:04

there on the right is bent it's hard to

00:09:08

make it out but it is bent just a little

00:09:11

bit it's still open and closed fine but

00:09:13

it's bent a little bit and then you can

00:09:15

see the fix blade this one edge got

00:09:19

nicked up right there in the steel the

00:09:23

other ones still fine

00:09:25

and over here with a smaller one the one

00:09:28

in one-quarter inch looks like all the

00:09:31

blades held up fine

00:09:35

yeah they held up fine well that's

00:09:38

impressive I thought it had bent but it

00:09:40

doesn't look like it did it was just the

00:09:41

angle maybe maybe slightly but they

00:09:43

still open and close fine and yeah he's

00:09:46

held up really well through the steel

00:09:49

plate so let's see how they do into the

00:09:53

cinder block and I think I should say

00:09:54

something like don't try this at home

00:09:56

but dang it I'm right here in my home

00:09:58

I'm trying this maybe don't follow my

00:10:01

example I do have glasses on I'm hoping that

00:10:03

will protect me here if something

00:10:05

shatters and I'm putting a little

00:10:07

barricade in front of me so first the 1

00:10:10

and 1/4 inch now the 1 and 3/8 inch

00:10:20

[Music]

00:10:24

dang that one's stuck so here's the

00:10:27

cinder block and you can see this one's

00:10:29

stuck in here this is the the larger cut

00:10:32

one it got a bit mangled one of the

00:10:35

blades looks like it broke off right

00:10:36

there the other one just bent and the

00:10:40

whole ferrule got pretty bent up there

00:10:42

but man it did stick in and it's hard to

00:10:46

get out okay I'm gonna unscrew the tip

00:10:49

the tip is actually something I think

00:10:51

that screws in and out okay my truth

00:10:55

it's ready to do this without losing a

00:10:56

finger well yeah there we go okay so you

00:11:01

can see both of the heads left a mark

00:11:05

Wow those things are like embedded in

00:11:09

there I've never seen that well that tip

00:11:11

is like way stuck in there so the tip

00:11:16

screws in to place it's like a

00:11:19

replaceable tip I imagine but man that

00:11:22

thing just embedded in that like a like

00:11:26

a bolt or something I don't know if I'm

00:11:28

gonna be able to get that out and then

00:11:30

in terms of heads themselves well you

00:11:34

can see this is the one that I just

00:11:36

pulled out - that tip

00:11:38

that's still in there and then the other

00:11:41

one this is the head that bounced out

00:11:47

- that tip Wow so I I'm pretty impressed

00:11:51

here I didn't expect them to do that

00:11:55

well I thought maybe they'd shatter I've

00:11:56

seen a number of mechanicals who shatter

00:11:58

I certainly didn't expect those tips to

00:12:02

stay embedded there that's really

00:12:05

interesting so pretty tough heads right

00:12:07

here especially for a hybrid cutting

00:12:10

head like that that's impressive there

00:12:12

you have it these feather performers

00:12:14

yeah I gotta be honest I I was surprised

00:12:18

I didn't expect the flight that I got

00:12:21

from the these hybrids at longer range

00:12:25

and it's nice they come with practice

00:12:26

heads so you don't have to be messing up

00:12:29

the heads that you have in the practice

00:12:30

heads fly just like these heads I mean

00:12:33

there you can look at them and see they

00:12:35

look the same so they the brakus heads

00:12:37

flew really well and so they passed all

00:12:40

those tests and then in terms of

00:12:42

penetration

00:12:43

I wasn't expecting much again because

00:12:45

that's so much cut 2.3 inches 2.4 inches

00:12:49

but they actually penetrated pretty well

00:12:52

ok I'd say overall that not as good as

00:12:54

like you know a smaller cut head will

00:12:57

there's no question about that but they

00:12:59

still penetrated fairly well and then

00:13:02

the angled cut they handled the angles

00:13:04

really well the steel I wasn't sure how

00:13:07

the blades would hold up but the blades

00:13:09

actually held it well they use 440c

00:13:11

stainless steel heads or stainless steel

00:13:14

blades which is really nice and they're

00:13:16

0.050 3/5 inches thick which is really

00:13:20

nice so that showed and then I was

00:13:22

really surprised with the 0 penetration

00:13:25

test into the concrete these these pro

00:13:28

series tips just like embedded deeply in

00:13:32

that in that cinder block I can't get it

00:13:34

out I mean I was looking at that just

00:13:36

going man that is impressive it's like

00:13:38

it was it was drilled in there or

00:13:40

something and that's a lot of head that

00:13:42

could be sticking in a bone or something

00:13:44

that would really hurt you saw that you

00:13:47

know when you get an aluminum faire like

00:13:49

that even tough as these are you

00:13:51

saw that the feral itself been up pretty

00:13:53

badly hitting the concrete but that's to

00:13:56

be expected I would say for a mechanical

00:14:00

head like this a hybrid shooting into

00:14:02

cinderblock I would consider that pass

00:14:04

like it did better than I thought it

00:14:07

would do and definitely passes my

00:14:09

threshold of would I use it in the field

00:14:12

I definitely would use these in the

00:14:14

field these are these are really great

00:14:16

heads to consider this coming fall

00:14:18

whatever you're going to hunt there's a

00:14:20

size to match it your kinetic energy and

00:14:24

the animal you're going after you got to

00:14:26

give these a look

00:14:28

[Music]

00:14:34

[Applause]

00:14:36

[Music]

Description:

Let's see how this new head performs in flight, penetration, and durability. Will it handle the steel plate & cinder block? Please consider donating to my Channel so I can do more testing. The link is on my home page graphic. It is www.paypal.me/luskarcheryadventure Also check out my Amazon Store Front with ONLY archery gear that I've tested & recommend. www.amazon.com/shop/luskarcheryadventures Any proceeds I get will be invested back into my gear testing :)

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "GRIM REAPER MICRO HYBRID Broadhead Test" video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "GRIM REAPER MICRO HYBRID Broadhead Test" video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "GRIM REAPER MICRO HYBRID Broadhead Test" video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "GRIM REAPER MICRO HYBRID Broadhead Test" video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "GRIM REAPER MICRO HYBRID Broadhead Test"?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "GRIM REAPER MICRO HYBRID Broadhead Test"?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.