Download "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов"

"videoThumbnail Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов

SOLIDWORKS Кронштейн Model Mania 2021. Деталь по Чертёжу | Саляхутдинов Роман

SOLIDWORKS Кронштейн Model Mania 2021. Деталь по Чертёжу | Саляхутдинов Роман

Channel: Роман Саляхутдинов - Центр Обучения САПР

КОМПАС-3D. Урок Вал с резьбой и шпоночным пазом | Роман Саляхутдинов

КОМПАС-3D. Урок Вал с резьбой и шпоночным пазом | Роман Саляхутдинов

Channel: Роман Саляхутдинов - Центр Обучения САПР

SolidWorks. Маска защитная. Поверхности Сплайны | Роман Саляхутдинов

SolidWorks. Маска защитная. Поверхности Сплайны | Роман Саляхутдинов

Channel: Роман Саляхутдинов - Центр Обучения САПР

SolidWorks. Урок. Отсечение удаление части модели. Команда Разделить | Роман Саляхутдинов

SolidWorks. Урок. Отсечение удаление части модели. Команда Разделить | Роман Саляхутдинов

Channel: Роман Саляхутдинов - Центр Обучения САПР

SolidWorks. Урок. Обойма сепаратора. Массивы | Роман Саляхутдинов

SolidWorks. Урок. Обойма сепаратора. Массивы | Роман Саляхутдинов

Channel: Роман Саляхутдинов - Центр Обучения САПР

SolidWorks. Сборка сверху-вниз. Болтовое соединение с резьбой М20. Чертеж | Роман Саляхутдинов

SolidWorks. Сборка сверху-вниз. Болтовое соединение с резьбой М20. Чертеж | Роман Саляхутдинов

Channel: Роман Саляхутдинов - Центр Обучения САПР

SOLIDWORKS: Model Mania 2019. Интересная Деталь. Создаём по Чертежу | Саляхутдинов Роман

SOLIDWORKS: Model Mania 2019. Интересная Деталь. Создаём по Чертежу | Саляхутдинов Роман

Channel: Роман Саляхутдинов - Центр Обучения САПР

SOLIDWORKS: Model Mania 2020. Два Варианта Построения. Создаём по Чертежу | Саляхутдинов Роман

SOLIDWORKS: Model Mania 2020. Два Варианта Построения. Создаём по Чертежу | Саляхутдинов Роман

Channel: Роман Саляхутдинов - Центр Обучения САПР

КОМПАС-3D v23 Пазы Долгожданные. Новинки. Тестирую beta Версию | Роман Саляхутдинов

КОМПАС-3D v23 Пазы Долгожданные. Новинки. Тестирую beta Версию | Роман Саляхутдинов

Channel: Роман Саляхутдинов - Центр Обучения САПР

SolidWorks. Урок №3. Переход в 3D-пространство. Создание детали. Часть 1

SolidWorks. Урок №3. Переход в 3D-пространство. Создание детали. Часть 1

Channel: Роман Саляхутдинов - Центр Обучения САПР

Autodesk Inventor

инвентор

inventor

обучение

курсы

самоучитель

уроки

видео уроки

руководство inventor

саляхутдинов роман

обучение inventor

скачать inventor

курсы inventor

сапр

модель

чертеж

плоскость

сборка

расчеты

пуансон

autodeskinventor

cad

романсаляхутдинов

00:00:01

hello dear friends, we're in touch Roman

00:00:03

herring and in this video tutorial we will

00:00:05

create a 3D model of Panna in the inventory. I

00:00:09

created a similar part in the compass, but

00:00:11

users of the inventory also asked

00:00:14

me to create this model in the inventory and

00:00:16

now we will start creating it. In

00:00:19

general, a question about this part was in the

00:00:22

VKontakte group video tutorials compass 3D

00:00:25

SolidWorks inventor You can also find this group

00:00:28

at

00:00:30

.com compass Well, or find Here for

00:00:33

this request the group is dedicated to lessons on

00:00:36

compass 3w and inventory join the group

00:00:40

take part in discussions watch a new

00:00:44

video in this group In general join and

00:00:47

you will be aware of all the events, so here is

00:00:51

a question about this detail, as I already

00:00:52

said, it was in

00:00:54

discussions like Paul who

00:00:59

attached such a drawing to the question and therefore

00:01:01

we will create a ponn for the drawing, let

00:01:03

me now remove it like this and let’s

00:01:06

get started on the quick access panel,

00:01:08

click click on the create button like this and

00:01:11

let's select the creation of parts with the

00:01:15

extension ipt normal like this Let's

00:01:19

get started, click on the start sketch button,

00:01:23

select the XY plane and on this plane

00:01:27

we will create the first sketch Let's

00:01:28

run the

00:01:30

circle command, this will be

00:01:32

auxiliary, so on the format panel

00:01:34

Let's click on the button auxiliary

00:01:36

geometry and and points of origin let's

00:01:39

create a circle, the diameter of the

00:01:42

circle is 22 mm. Therefore, enter

00:01:45

11 in the field and press the Enter key. So,

00:01:48

the circle has been created, press the button

00:01:51

on the format auxiliary

00:01:53

geometry panel next. The circle command

00:01:57

is active, open the hole. Let's

00:02:01

create a circle here, we've touched and

00:02:04

circles. let's create a circle like this here, we

00:02:07

also

00:02:09

have made a touch here, you and I will create a

00:02:11

circle here Let's complete the

00:02:13

circle command Escape key Look,

00:02:15

even though we have made a touch, but we have

00:02:17

n't created a dependency You see Yes, and

00:02:20

also here there are no touch dependencies everywhere,

00:02:22

let's do it In principle, we will create it

00:02:25

so that you can see the dependency. You can

00:02:27

press F on the keyboard. That is,

00:02:30

show all the dependencies, or click

00:02:33

on this

00:02:35

button. Now all the dependencies

00:02:38

are displayed, you can see. There are no dependencies and

00:02:41

Let’s run the touch command on the dependency panel,

00:02:43

here we will indicate with

00:02:47

you the first curve

00:02:50

second The first second circle

00:02:54

was indicated and the second touch

00:02:57

was completed. So let's now

00:03:00

display the dependencies next. Let's

00:03:04

run the verticality command, that is,

00:03:07

we create a vertical dependency,

00:03:09

indicate the origin point and the center of

00:03:11

this circle, then run the

00:03:14

horizontal dependency command,

00:03:17

indicate the design of this circle and this one, so here

00:03:20

they are We now have them lying on the same

00:03:23

horizontal line and now let’s

00:03:25

make sure that the radii of all the circles are

00:03:28

the same,

00:03:30

let’s also run the equality command on the dependency panel,

00:03:32

indicate this circle,

00:03:35

then this one, then again indicate this

00:03:38

circle and this one, the diameters of

00:03:41

all of them are equal, we complete the command So

00:03:44

look now I decrease the diameter of one of the

00:03:46

circles and also the other diameters

00:03:49

decrease and

00:03:52

increase now let's run the

00:03:54

segment command and create a segment

00:03:57

from this point. You see, the snap

00:04:01

has worked, we create vertically draw

00:04:03

the segment again until it is

00:04:08

aligned with the origin point and

00:04:11

enter the tangent

00:04:15

icon to the right tangently

00:04:20

appeared everything created a segment left

00:04:23

mouse button pressed and in exactly the same way Here on

00:04:26

this side on the right Let's also

00:04:28

this Volume

00:04:31

up vertical segment again here

00:04:35

to the intersection with the point of origin

00:04:37

and lead

00:04:38

upward here regarding the dependence

00:04:42

displayed

00:04:43

complete further Let's run the command

00:04:46

arc in three points Here we have it, we’ll indicate

00:04:50

the starting point, the end

00:04:54

point and we’ll indicate the point on the

00:04:57

arc, so great here we have

00:05:00

tangent Yes it was formed But here it’s not

00:05:02

Let’s create a dependency, run the tangent

00:05:04

command, indicate this circle

00:05:07

and this arc, that’s all If you do

00:05:11

n’t have a tangent here either, then you can create So

00:05:14

wait, she was here now for some reason is

00:05:17

not displayed Well, you can see

00:05:18

Yes, here she is, I clicked, she is now

00:05:21

displayed,

00:05:23

so on Let's perform a rounding

00:05:27

here, here we'll run the

00:05:32

conjugation command and Let's specify a radius of 2.5

00:05:36

mm, indicate the first segment and the second one

00:05:41

completed the rounding like this, let's indicate the first and

00:05:43

second perfectly, complete the command So,

00:05:47

now Let's delete the extra lines,

00:05:50

run the cut command on the

00:05:53

edit panel while holding the left mouse button,

00:05:56

draw here here and here, so great

00:06:01

and further Let's run the command dimensions

00:06:05

will set the radius of this arc to 4 mm So and

00:06:10

look, these radii also became 4

00:06:13

mm, this radius We also

00:06:16

indicate 4 mm. So let's indicate the size

00:06:20

from this line to this

00:06:22

line, the size is 18

00:06:26

mm. So here we need to change it a little.

00:06:31

Look here, we

00:06:33

need to put it in tangent Let's put the

00:06:36

dependence on the panel I run the command

00:06:39

tangently and indicate here and

00:06:42

here it’s perfectly indicated if you immediately

00:06:46

created a tangent here when

00:06:48

constructing a dependency, then you do

00:06:51

n’t need to do this, so again I

00:06:54

run the command dimensions continue

00:06:56

let’s now indicate the size from the

00:06:58

origin point to the center of this

00:07:01

vertical arc the size according to the drawing will be

00:07:06

0.71 And now let's create a

00:07:10

dependence of these two points, that

00:07:13

is, we have this in the center of the

00:07:15

doc,

00:07:17

run the horizontal dependence command,

00:07:20

indicate the first point

00:07:22

and the

00:07:23

second excellent and look at our sketch is

00:07:27

completely

00:07:28

defined,

00:07:30

complete

00:07:31

the command like in the drawing Here we

00:07:34

created the first sketch is with you now

00:07:36

Let's extrude it to a distance of 10

00:07:43

mm So let's go to the 3D

00:07:47

model tab, run the extrusion command,

00:07:50

we've already got the sketch determined at a

00:07:52

distance of 10 mm here Let's give it the

00:07:55

default, click

00:07:57

o next Look, we'll

00:08:00

create a second element also

00:08:03

by extruding Here this element, that is, with a

00:08:07

diameter of

00:08:08

24, the distance we have is 5 mm of extrusion, we

00:08:12

need to create this boss, so

00:08:15

let's first create an

00:08:17

auxiliary

00:08:18

plane. So, on the working

00:08:21

elements panel, we run the command plane and

00:08:23

specify this face, but we

00:08:27

need the plane at a distance, so

00:08:30

hold down the left mouse button

00:08:33

hold and move to the right, we will shift

00:08:36

by 8 mm, so let's

00:08:38

enter the value 8 mm in this field, press the

00:08:41

Enter key. Excellent, the plane

00:08:44

is ready, we complete the plane command. You

00:08:47

see the cursor on the right, the plane

00:08:49

is displayed, the command is active by pressing the

00:08:52

escap key, we complete

00:08:55

Next, click on our plane New with

00:09:00

run the command circle and From the point of

00:09:03

origin of coordinates, create a circle with a

00:09:05

diameter of 24, that is, enter the

00:09:08

radius value of 12 mm in the field, press the

00:09:11

Enter key and look, the circle is

00:09:16

ready. Let's press the Escape key and

00:09:20

move the cursor to the

00:09:22

auxiliary plane. Click with the right

00:09:24

mouse button and here in the context menu

00:09:27

visibility Let's open

00:09:31

hide all the working plane, then

00:09:33

go to the 3D model tab run the

00:09:35

extrusion command direction correct

00:09:37

distance Let's specify 5

00:09:40

mm Great, we have created two

00:09:44

elements using the extrusion command,

00:09:47

now we need to combine them. To do this, we will

00:09:50

need the

00:09:52

LT command. That is, this is creating a

00:09:56

shape between two objects We

00:10:00

will perform with you in other systems

00:10:03

this command is called by

00:10:06

sections Let's run the FT command and the

00:10:10

T window has opened now we need to

00:10:14

specify the section, you can open it in the browser here

00:10:17

extrusion

00:10:20

O here is a sketch o You can select from here

00:10:24

also extrusion here e 2

00:10:27

you can uh, you can specify the edges Let's

00:10:30

indicate the edges,

00:10:31

rotate our part, here you bring the cursor to the

00:10:36

edge Click on it You can see edges one, here

00:10:40

they are highlighted, then here you bring the cursor

00:10:43

to this edge Click here, there are

00:10:45

two edges and now

00:10:48

in the preview you can see

00:10:52

how we will have it after creation Let's

00:10:54

click Okay

00:10:56

and take a look. Here we

00:11:00

used the LT command and connected

00:11:03

these two

00:11:06

elements. Now let's change the color

00:11:10

here, on the quick access panel,

00:11:12

select some color. Well, let's

00:11:14

select Wheat. Find it. Wheat,

00:11:17

you can choose something at your discretion

00:11:18

here. I chose Pshenichny and

00:11:21

look at the ponn you and I

00:11:28

have created,

00:11:30

so

00:11:33

everything turned out as according to the

00:11:38

drawing Well, this is where our video lesson

00:11:42

has come to an end Don’t forget to

00:11:45

join the

00:11:47

group Well, also subscribe to my

00:11:50

channel on YouTube, you will find the channel at

00:11:54

youtube .com

00:11:56

CP

00:11:58

Blog channel is also dedicated to video tutorials on

00:12:01

Compass 3D SolidWorks and Autodesk

00:12:03

inventor Here you will also find various

00:12:07

lessons on this, I wish you success

00:12:10

See you in the next videos

Description:

✔ Уроки по Autodesk Inventor: https://inventor.saprblog.ru/ ✔ Полный курс: http://kurs.inventorcad.ru ✔ Instagram: https://www.facebook.com/unsupportedbrowser ✔ Мой блог: http://saprblog.ru/ ✔ Группа вконтакте: http://vk.com/saprblog

Preparing download options

Popular

HD video

Only sound

All

* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."

** — Link intended for online playback in specialized players

Questions about downloading video

How can I download "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов" video?

http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.
The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.
UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.
UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

Which format of "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов" video should I choose?

The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

Why does my computer freeze when loading a "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов" video?

The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

How can I download "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов" video to my phone?

You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

How can I download an audio track (music) to MP3 "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов"?

The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

How can I save a frame from a video "Autodesk Inventor. Урок №9. Создание детали Пуансон | Роман Саляхутдинов"?

This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

What's the price of all this stuff?

It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.