background top icon
background center wave icon
background filled rhombus icon
background two lines icon
background stroke rhombus icon

Download "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!"

input logo icon
Video tags
|

Video tags

автозвук
короб для сабвуфера
Subtitles
|

Subtitles

subtitles menu arrow
  • ruRussian
Download
00:00:02
rather a self-made housing for a low-frequency speaker,
00:00:05
was and remains the pinnacle of the top approach to
00:00:08
organizing the low-frequency section in
00:00:10
any audio system, including in
00:00:12
car audio, how things were not so long ago, I
00:00:14
chose a speaker, decided on the design,
00:00:17
calculated and ordered orders there, calculated the housing,
00:00:19
bought or I took a sheet of plywood from somewhere, I
00:00:22
had a good time in the garage
00:00:24
cutting and assembling I received an
00:00:26
individual subwoofer made
00:00:27
specifically for my system which
00:00:30
sounds great and if of course all the blocks and I
00:00:32
had a calculation process, well, the assembly itself,
00:00:34
besides, it was done with my own hands
00:00:36
something very important, quite on a budget,
00:00:39
looking around with anxiety looking at the prices
00:00:41
of materials in general at all prices, it
00:00:43
becomes clear from already plywood that
00:00:45
now this rather expensive
00:00:47
pleasure is becoming an expensive
00:00:48
pleasure before us, just that not
00:00:50
every amateur can afford it,
00:00:52
if before it happened guys and your humble
00:00:54
servant, including turning up their noses at the
00:00:56
cabinets from grandmothers’ old cabinets,
00:00:58
now you can seriously think about this
00:01:00
topic, I’m not even talking about
00:01:02
today’s sharp increase in prices in
00:01:04
Russia, the price tags for
00:01:06
building materials are creeping up continuously
00:01:08
and for a long time, and many can remember in the
00:01:10
segment a surge that occurred a little less than a year ago,
00:01:12
including I became
00:01:14
interested and decided to calculate how much it would
00:01:15
cost a bass lover today to make a
00:01:17
self-made subwoofer; this will help
00:01:20
increase their capabilities for those who
00:01:21
are planning to do this, and it will also be
00:01:24
interesting to watch this video, let’s say in a
00:01:25
few months, after
00:01:27
what It’s time to evaluate the state of affairs
00:01:29
because lately
00:01:31
this phrase has been increasingly justified until it
00:01:33
seemed that it couldn’t get any worse, but it
00:01:35
seemed that it only seemed like that, well, here’s a pun.
00:01:37
Today we’ll look at
00:01:39
what you need to
00:01:41
make your own subbuffer and how
00:01:43
you can save money. on the Doctor Bass channel, let
00:01:49
's go, let's all, of course, keep all the calculations
00:01:52
on average for the company, as they say, and
00:01:54
the most common option is a 12-
00:01:56
inch speaker in a bass reflex housing,
00:01:58
so for this we will need a speaker,
00:02:01
which one depends on appetites and
00:02:03
possibilities, of course, then you
00:02:05
will like it in the housing drawing You can
00:02:07
do it yourself here on the channel.
00:02:09
By the way, there is a separate playlist that will
00:02:11
help you with this, or you
00:02:13
can order it for money. The average price range
00:02:15
for housing calculations today
00:02:17
varies from about 500 to 1000
00:02:20
rubles, let’s take the average 750, then we
00:02:23
will need material with you as a rule. a
00:02:24
sheet of plywood 18 millimeters in size
00:02:26
1525 1525 will be enough in most
00:02:30
cases, there will even be something left over, I
00:02:32
asked around in our telegram chat and in the
00:02:34
VKontakte group and the cost of plywood in
00:02:36
different regions there is a range of prices, but it’s
00:02:38
expensive and everywhere, as a guide, let’s take
00:02:40
the price at a well-known store let's
00:02:42
take 17 millimeters and plywood from one and
00:02:44
a half to one and a half
00:02:57
three thousand rubles, 3 thousand and this is still a
00:03:00
very good price, I'll tell you, you
00:03:01
can just dare to offend and take it, I
00:03:04
still live in the world; in fact, it cost 800 rubles there,
00:03:06
but that was a very long time ago and apparently This is
00:03:08
not true at all, and so they took plywood,
00:03:11
perhaps even with a cut, now you need to
00:03:13
assemble the whole thing, I often ask for
00:03:15
such glue or sealant to use during
00:03:16
assembly, firstly, sealant cannot
00:03:18
be used, well, that is, no one
00:03:20
forbids applying it there, yes, but it would be
00:03:22
a mistake if you coat such things they
00:03:24
will not be rigid, that is, the parts will not be
00:03:26
rigidly fixed to each other, as you
00:03:28
understand, if you have straight backs, then
00:03:30
the best thing is simple pva glue and a
00:03:32
large one will be enough for
00:03:35
your eyes; if you sang, say, with a jigsaw, you
00:03:37
got uneven joints, then
00:03:38
you can get out of the situation with the help of
00:03:40
liquid nails, but it’s better to still
00:03:42
try to make an even cut and, if
00:03:44
possible, not use a jigsaw on at
00:03:46
least a manual circular tube it
00:03:48
will cost around 150 rubles for 250
00:03:51
milliliters of a self-tapping screw, let it be 150,
00:03:55
which is right with a margin, if possible then It’s
00:03:57
better to take galvanized or so-
00:03:59
called yellow ones; on average, according to
00:04:00
reading, black ones often
00:04:02
have their hats open, but here, of course, it
00:04:04
depends more on the quality; choose the length
00:04:06
so that it is larger, a little bit from the
00:04:08
double wall thickness, we have 18
00:04:10
walls when, therefore, 45 millimeters
00:04:12
with a self-tapping screw it will be the best I
00:04:14
think here 250 rubles you can easily go to bed, it
00:04:17
would seem that everything is possible, but there is no need for
00:04:20
wires to connect the speaker to the
00:04:22
amplifier, the question often arises of
00:04:25
what thickness to use, this
00:04:27
wire is a lot if there is a sign on this
00:04:29
topic, including we will have
00:04:31
such a sign on VKontakte but I wouldn’t
00:04:33
fall for it so much, the main thing is to take
00:04:35
normal copper, even if it’s just simple
00:04:37
PVC, and choose the thickness that will
00:04:39
fit into the terminal and
00:04:41
subwoofer as much as possible, and don’t forget to
00:04:43
twist if you swing the coils, I
00:04:45
always have this problem, I’ll take a
00:04:47
thick wire, it’s so serious
00:04:49
car audio rapota suffer with obscenities you to
00:04:52
him in this very terminal all this
00:04:53
fluff doesn’t interfere, in general it’s just nerves
00:04:55
to overdo it too much in this case it
00:04:57
doesn’t make much sense 300 rubles
00:04:59
humane sane cable will be enough then you will
00:05:01
need a terminal
00:05:04
to pass the wire through the wall the prices
00:05:06
for them vary and I think that it
00:05:08
would be acceptable now 500 rubles, it costs no
00:05:10
need to save on it, it’s absolutely flimsy, you
00:05:12
don’t need to take it, but you can do without it, the
00:05:13
easiest option is to take the wires out
00:05:15
through a hole straight through the wall,
00:05:17
drill it and then try
00:05:19
to seal it, the only thing is that it won’t always
00:05:21
look neat and aesthetically pleasing
00:05:23
second the option to use simple
00:05:26
bolts and nuts with wing washers
00:05:28
will cost a couple of tens of rubles; the
00:05:29
only thing is that if the wall is not recessed, then
00:05:31
it will stick out; this is the design that
00:05:33
not everything can fit; well, the third way is to
00:05:35
simply run the wires through the port, I
00:05:38
know people who are literally shaking from
00:05:39
this kind of thing way, I personally
00:05:41
treat it calmly, it can even
00:05:43
put on such a careless brutality
00:05:45
if the wires look good, then sometimes
00:05:47
it can even look somehow normal, the
00:05:49
main thing is that they
00:05:51
don’t make noise there in the park and don’t broccoli here, it
00:05:53
seems like everything would be if we wanted, of course
00:05:55
leave the bare body, but what is not always
00:05:57
suitable is not always acceptable the
00:05:59
simplest way of decoration as you were and
00:06:01
remains this is pasting with carpet now there
00:06:04
is a self-adhesive shadow you need to
00:06:06
fiddle with the old times there with a brush with glue
00:06:07
in a moment quite convenient but oddly
00:06:10
enough it costs money link to a
00:06:12
verified store on the well-known
00:06:13
site I will leave it in the description there, you can
00:06:14
look at the options to compare,
00:06:17
let’s take 3 linear meters for the comfort of work,
00:06:19
which will cost as much as one and a half
00:06:21
thousand rubles, now we are already close to the
00:06:23
finish line, but
00:06:25
the port remains unpainted, you will need paint, as
00:06:27
a rule, this is done from a spray can, it
00:06:29
will become about 250 rubles, by the way, the
00:06:32
port is beautiful at the assembly stage, so it will be more convenient
00:06:34
so as not to occupy it later, already
00:06:35
assembled from the outside, this is usually the case with a
00:06:38
happy port, but if you have a pipe
00:06:40
or you plan to use a pipe, then the
00:06:42
port itself will also have to be
00:06:44
bought, I don’t take it here is self-
00:06:46
production because without experience you
00:06:48
will only suffer and it is possible to spend even
00:06:50
more resources there during the flight a couple of pipes,
00:06:52
but if you know how, then you probably
00:06:54
already know all this and have gone through it more than once, so be
00:06:56
sure to write how you try to be able to
00:06:57
do it when making a subbuffer and
00:06:59
how it goes for you things happen with
00:07:01
materials with prices for them, so for a
00:07:03
two-piece, as a rule, you will need 170
00:07:06
pipe, this is usually 160 millimeters in diameter
00:07:07
and will cost about one and a half
00:07:10
thousand rubles, let's summarize the
00:07:12
cheapest option feels without
00:07:15
covering processing is plywood 3000
00:07:17
self-tapping screw 250 glue 150 pro 300 it turns out
00:07:20
3,700 this is my account we don’t take the
00:07:23
same thing on the pipe plus one and a half thousand
00:07:26
we get already 5,200 already this is a
00:07:28
comparable amount to the cost of the
00:07:30
Kunikov subbuffer luxury option this is
00:07:33
plywood self-tapping screws glue wire terminal block 500
00:07:36
rubles carpet 1500 paint 250 already
00:07:39
turns out 5,950 lux surviving the pipe, this
00:07:43
minus the paint 250 sport for one and a half thousand is
00:07:46
already coming out, frankly speaking, it’s so impressive,
00:07:49
even if without calculation, well, there are a lot of
00:07:51
options for matching between them, of course,
00:07:53
adjusted for prices in your
00:07:55
regions, that’s roughly what you need to
00:07:57
imagine before making your
00:07:59
own subwoofer, that is the case
00:08:00
is a lot for him or not enough for him, I think it’s
00:08:03
different for everyone, but even with what
00:08:05
was literally a year and a half ago, yes,
00:08:07
but I’ll just say it’s a lot to get
00:08:10
used to at such prices, there will probably be
00:08:12
even more on similar topics on the
00:08:14
channel, by the way, there’s a video about hidden ones
00:08:16
costs in car audio, look at them, they are
00:08:17
actually more than it might seem, and
00:08:19
in general there are also useful
00:08:21
interesting videos on the channel, so subscribe
00:08:22
and you won’t miss anything; besides, this is
00:08:25
the best support from you; the most
00:08:27
attentive viewer may wonder
00:08:28
what this speaker is doing here
00:08:30
just standing there table and what kind of
00:08:32
day is it these are the speakers I put here so that the
00:08:35
picture is at least somehow approximated by
00:08:37
the sound further here is the article Dr. bass
00:08:39
dot ru opened and these are friends of the
00:08:42
Ural Thunder speakers this is what they look like and I
00:08:46
think soon a video with their participation will appear on the channel
00:08:48
I don’t know in what
00:08:50
format yet, but if you’re interested, take a look,
00:08:53
this is how it will be literally soon,
00:08:56
so subscribe again and don’t
00:08:58
miss it, and probably 70 people behind
00:09:00
YouTube, yes, you know that as there are
00:09:02
various tensions, people are worried that
00:09:05
it might be closed. I have already written to
00:09:07
the community more than once in the form of a separate film, and I
00:09:09
won’t dwell on this in particular,
00:09:11
probably everyone understands everything, everyone knows everything,
00:09:12
roughly, all the
00:09:15
alternative links to all communication channels of the
00:09:18
social network will be in the description and in the
00:09:21
channel header, which you can see in fact,
00:09:23
let’s move on Well, you and I got
00:09:26
the sums, how can we still
00:09:28
save money? In this case, I’ll tell you what
00:09:30
comes to my mind and you be sure to
00:09:31
write if you have anything to add, it will be
00:09:33
useful for everyone, the first thing, of course, is to
00:09:36
try to find plywood as cheaply as possible,
00:09:38
the guys dodge, take it from the market
00:09:40
somewhere it finds somewhere they sacrifice the variety
00:09:42
someone is lucky and there are outlets for
00:09:44
some kind of production where it is
00:09:45
actually used, then you can find the
00:09:47
fillet material cheaper, well,
00:09:50
we don’t talk about dismantling old cabinets, but we
00:09:51
keep new ones, the second thing is to
00:09:54
save on terminal block and wires,
00:09:56
wires, you can choose the most common one, the
00:09:58
same PVC, and generally take scraps if
00:10:00
someone has them regarding ready-made
00:10:02
ports, look at large sites
00:10:04
like ozone, you can get a good
00:10:06
discount and at the same time we will have free
00:10:08
delivery on it, you will save, unlike
00:10:09
Moreover, if you order in some
00:10:11
online store, yes, this is relevant for
00:10:13
those who have access to
00:10:16
such services in populated areas, such things are not sold, well,
00:10:19
one of the surest ways to do this is
00:10:20
not to deal with car audio at all, the
00:10:22
biggest savings, which of course is not
00:10:24
suitable for us, despite all this situation,
00:10:27
if you remember the origin of car audio in
00:10:29
Russia before its heyday, it
00:10:31
happened precisely during very difficult
00:10:33
difficult times, but I’m sure that
00:10:34
almost everyone who was not involved
00:10:35
remembers it with special warmth, of
00:10:37
course, now the situation is radically
00:10:39
different, but now it’s like there are
00:10:41
domestic manufacturers as much
00:10:43
as possible, the secondary
00:10:45
market, the main thing is that there is a desire, I
00:10:47
tried to make this video useful,
00:10:49
share it, it really helps, let
00:10:51
everyone be fine, and for today, see you
00:10:53
later
00:10:58
[music] [
00:11:13
music]
00:11:19
[music]

Description:

Сделать короб для сабвуфера можно своими руками, но потратится на материалы все-же придется. В этом ролике попытался прикинуть во сколько обойдется короб для сабвуфера и какие варианты существуют. Карпет самоклейка - http://alli.pub/6a2huy 🔊 Заказать расчет корпуса для сабвуфера в группе ВК - https://clck.ru/H8Kc7 🌐 Еще в сети: ➡Сайт: https://doctorbass.ru/ - подробные статьи; ➡Группа ВК: https://vk.com/doctorbass - музыка, общение, полезности; ➡Инстаграм: https://www.facebook.com/unsupportedbrowser ➡Яндекс Дзен: https://zen.yandex.ru/id/6015d67425d6a16fab744652 ➡Телеграм канал (там есть чат): https://t.me/drbasschannel 🔻 Оформить платную подписку и получить бонусы: ⚜ https://www.youtube.com/channel/UCYnXwXLbkvVS4EJFLPD651g/join 🔻 Поучаствовать в развитии проекта: ⚜ https://doctorbass.ru/uchastie-v-razvitii-i-podderzhka-doctor-bass/ 00:00 - смысл 01:02 - про рост цен 01:50 - чертеж 02:23 - материал 03:11 - клей или герметик? 03:53 - саморезы 04:21 - провод 05:02 - терминал 05:51 - внешний вид 06:39 - труба 07:11 - что получилось 08:27 - динамик на столе 09:00 - ссылки проекта 09:25 - как сэкономить 10:19 - автозвук всё? ↘Подписывайся на канал↙ https://www.youtube.com/c/DoctorBASS_YouTube?sub_confirmation=1%22 ❗ Дисклаймер! - https://doctorbass.ru/disklaymer/ 🔊Doctor BASS - Автозвук Простыми Словами.

Preparing download options

popular icon
Popular
hd icon
HD video
audio icon
Only sound
total icon
All
* — If the video is playing in a new tab, go to it, then right-click on the video and select "Save video as..."
** — Link intended for online playback in specialized players

Questions about downloading video

mobile menu iconHow can I download "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!" video?mobile menu icon

  • http://unidownloader.com/ website is the best way to download a video or a separate audio track if you want to do without installing programs and extensions.

  • The UDL Helper extension is a convenient button that is seamlessly integrated into YouTube, Instagram and OK.ru sites for fast content download.

  • UDL Client program (for Windows) is the most powerful solution that supports more than 900 websites, social networks and video hosting sites, as well as any video quality that is available in the source.

  • UDL Lite is a really convenient way to access a website from your mobile device. With its help, you can easily download videos directly to your smartphone.

mobile menu iconWhich format of "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!" video should I choose?mobile menu icon

  • The best quality formats are FullHD (1080p), 2K (1440p), 4K (2160p) and 8K (4320p). The higher the resolution of your screen, the higher the video quality should be. However, there are other factors to consider: download speed, amount of free space, and device performance during playback.

mobile menu iconWhy does my computer freeze when loading a "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!" video?mobile menu icon

  • The browser/computer should not freeze completely! If this happens, please report it with a link to the video. Sometimes videos cannot be downloaded directly in a suitable format, so we have added the ability to convert the file to the desired format. In some cases, this process may actively use computer resources.

mobile menu iconHow can I download "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!" video to my phone?mobile menu icon

  • You can download a video to your smartphone using the website or the PWA application UDL Lite. It is also possible to send a download link via QR code using the UDL Helper extension.

mobile menu iconHow can I download an audio track (music) to MP3 "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!"?mobile menu icon

  • The most convenient way is to use the UDL Client program, which supports converting video to MP3 format. In some cases, MP3 can also be downloaded through the UDL Helper extension.

mobile menu iconHow can I save a frame from a video "СКОЛЬКО СТОИТ СДЕЛАТЬ КОРПУС ДЛЯ САБВУФЕРА своими руками!"?mobile menu icon

  • This feature is available in the UDL Helper extension. Make sure that "Show the video snapshot button" is checked in the settings. A camera icon should appear in the lower right corner of the player to the left of the "Settings" icon. When you click on it, the current frame from the video will be saved to your computer in JPEG format.

mobile menu iconWhat's the price of all this stuff?mobile menu icon

  • It costs nothing. Our services are absolutely free for all users. There are no PRO subscriptions, no restrictions on the number or maximum length of downloaded videos.